1763711

Wire Gauge or Range - AWG:	12-30 AWG
Insulation Height:	0.591" (15.00mm)
Contact Tail Length:	--
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	7mm
Torque - Screw:	0.5-0.6 Nm (4.4-5.3 Lb-In)
Screw Size:	M3
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Mating Flange
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Black
Wire Gauge or Range - mm²:	0.2-2.5mm²
Series:	COMBICON IC
Voltage - IEC:	630V
Current - IEC:	12A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screw - Clamping Yoke (Tension Sleeve)
Plug Wire Entry:	180°
Header Orientation:	--
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	6
Number of Positions:	6
Type:	Plug, Male Pins
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks are widely used in all types of electrical applications, from industrial, commercial and residential to automotive and marine. They are commonly referred to as headers, plugs, and sockets. The electrical connection is often referred to as a terminal block or terminal strip.Terminal blocks are typically used to route power or data from one point to another. They are made up of a series of connectors that act as a channel for electrical signals or power to travel from one point to another. This electrical connection is often referred to as a “terminal connection”.The common terminal block consists of one or two rows of terminal pins. There are various sizes and types of terminal blocks depending on the application. For example, a standard 12-pin terminal block would typically consist of three rows of four pins each. This type of configuration can be found in automotive applications, such as car stereo installation.Each pin on the terminal block is connected to another point via an insulated conductor. This allows power or signal to travel from the source to its destination. It is important to note that all pins must be properly wired for the terminals to function properly.Terminal blocks can also be used to connect two points together. This can be done with the help of a jumper cable. The jumper cable is a strand of insulation that is between two terminals. It acts as an electrical bridge between the two points. The jumper cable is used to connect the power or signal from one point to another and is usually used in an array.Terminal blocks are designed to withstand varying levels of voltage and current. As the voltage and current increase, the terminal blocks are designed with additional safety features. This allows them to operate under more severe conditions. For example, in the case of electrical equipment, the vendors typically recommend a specific type and size of terminal block for the application of the equipment.Terminal blocks are also used to provide better insulation between the pins and the conductor. This is achieved by coating the pins with insulating material or using a terminal sleeve. The terminal sleeve acts as an effective insulation between the pins and conductor, preventing any short circuits or other dangerous electrical incidents.Terminal blocks are used in a wide variety of applications, from industrial, commercial, residential, to automotive and marine. These blocks are also a great way to integrate different electrical components together and offer a secure connection between them.In conclusion, terminal blocks are an essential component of any system that requires electrical connection. From industrial, commercial, residential to automotive and marine applications, the proper use of terminal blocks helps ensure the safety of everyone involved in the operations. With their versatile applications, they are a must for any electrical system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description