1784037

Wire Gauge or Range - AWG:	--
Insulation Height:	0.339" (8.61mm)
Contact Tail Length:	0.138" (3.50mm)
Housing Material:	Polybutylene Terephthalate (PBT)
Contact Material:	--
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	--
Features:	--
Contact Mating Finish:	Gold
Operating Temperature:	--
Color:	Black
Wire Gauge or Range - mm²:	--
Series:	COMBICON MSTBA
Voltage - IEC:	400V
Current - IEC:	12A
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	90°, Right Angle
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	3
Number of Positions:	3
Type:	Header, Male Pins, Shrouded (4 Side)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and SocketsTerminal blocks are devices that are used to connect two electrical points in a circuit, such as the positive and negative connections on a battery. They are available in various configurations, such as headers, plugs, and sockets. The 1784037 application field and working principle of a terminal block determine the type of device to be used.Headers are terminal blocks that have one or more individual connectors for wires to be inserted. A header may contain two, three, four, or more connectors. The wires are inserted into the header and then secured with screws, nuts, or similar fastenings. The benefit of a header is the ability to accommodate multiple wires in a single device, rather than having multiple terminals for each wire. The downsides are the space constraints and the limitation on the number of connectors the header can accommodate.Plugs and sockets are another form of terminal block. They are generally used to connect and disconnect two wires at a given point in a circuit. Typically, one wire is inserted into a plug, while the other is inserted into the corresponding socket. This type of terminal block provides convenience when wiring multiple points in a circuit. It can also help to reduce the risk of short-circuiting due to incorrect connections. The downside is that the plugs can become disconnected accidentally if not secured properly.Terminal blocks, in general, are designed to offer a high level of protection from electrical hazards. They are usually equipped with a mechanism to protect against accidental short-circuiting and mechanical shock. In addition, most terminal blocks come with insulation to protect the wires from external interference or corrosion.Terminal blocks are very common in applications that require multiple points of connection in circuits. Examples include wiring large motors, lighting fixtures, factory equipment, monitoring devices, and other such applications. In many cases, these terminal blocks are used to make multiple connections between two devices, such as a computer and a printer.To get the most out of terminal blocks, proper installation is important. First, check the instructions carefully on how to properly connect wires to the terminal block. Next, ensure that all wires are connected securely, using correct connections. Furthermore, inspect the terminal block and the surrounding environment for any signs of damage, such as corrosion or mechanical wear. Finally, check the voltage and current ratings on the terminal block to make sure that the maximum load it can handle is not exceeded.In conclusion, terminal blocks - headers, plugs, and sockets - are devices used to connect two electrical points in a circuit. These devices are widely used in applications that require multiple points of connection in a circuit. They offer safety by providing protection from short-circuiting and other electrical hazards, as well as insulation to avoid external interference or corrosion. Proper installation is needed to get the most out of this device.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description