1821478

Voltage - UL:	150V
Insulation Height:	0.280" (7.10mm)
Contact Tail Length:	0.079" (2.00mm)
Housing Material:	Liquid Crystal Polymer (LCP)
Contact Material:	--
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Solder Retention
Contact Mating Finish:	Gold
Operating Temperature:	--
Color:	Black
Wire Gauge or Range - mm²:	--
Wire Gauge or Range - AWG:	--
Series:	MICRO-COMBICON MCV
Current - UL:	6A
Voltage - IEC:	160V
Current - IEC:	6A
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	Vertical
Pitch:	0.100" (2.54mm)
Number of Levels:	1
Positions Per Level:	10
Number of Positions:	10
Type:	Header, Male Pins, Shrouded (4 Side)
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and SocketsTerminal blocks used in the manufacturing of electrical equipment are designed to serve many purposes. Commonly referred to as “headers”, these standardized components connect one or more wires to a ground or current source. The use of these blocks can help to reduce disruption of electrical current flow while also safeguarding against degradation due to environmental conditions such as heat, moisture, and wear and tear. Terminal blocks are available in many different sizes, configurations, and materials. The most common types are insulated, single or multi-pin, and loose piece. Insulated terminal blocks are designed to ensure insulation between conductors and the environment, ensuring a consistent flow of electrical charge without disruption. The most common type of insulated terminal block is made up of a conductive top, insulating middle, and hex nut on the bottom. Single and multi-pin terminal blocks are designed to designate individual conductors via separate pins, allowing for more flexibility in wiring applications. In this type of block, the electrical conductors are enclosed in a plastic molding or connected through a soldering process. Loose piece terminals are used when there is a need to rapidly change out individual conductors. In addition to headers, plugs and sockets are also often used to facilitate the transfer of electrical charges between two components. As with headers, these components come in various sizes, shapes, and ratings. A typical plug and socket set consists of a female connector on one end and a male connector on the other, providing a secure and reliable connection. The rating of the plugs and sockets should always match in order to ensure safe operation and prevent accidental electric shock. In terms of working principle, headers, plugs, and sockets serve the same purpose. They provide a physical connection between the component and the conductor in order to establish a reliable electrical connection. The connection is accomplished through the use of metal contacts, which act as conduits for the current to flow. Care must be taken when wiring these components to ensure the correct type of wire and connectors are used in order to prevent overheating or premature failure of the connection. When it comes to the application of these components, they are most commonly used in electronics manufacturing. The most common applications include automobiles, consumer electronics, and industrial control systems. In automotive applications, these components are used to connect wiring harnesses to the ECU (electronic control unit) and other components. In consumer electronics, they are often used to power home entertainment systems and other electrical appliances. Finally, in industrial control systems, these components are used to transfer voltage or current between two components, such as a sensor and a motor. Terminal blocks, headers, plugs, and sockets are essential components of most electrical systems. They are used to quickly, easily, and reliably connect one wire or cable to another, providing a secure connection for the transfer of electricity. The application of these components depends on the requirements of the particular system, and the correct selection of components is key to ensuring the system’s safety and reliability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description