1871440000

Voltage - UL:	300V
Insulation Height:	0.411" (10.44mm)
Contact Tail Length:	--
Housing Material:	Polyamide (PA), Nylon, Glass Filled
Contact Material:	Copper Alloy
Wire Strip Length:	7mm
Torque - Screw:	0.2-0.25 Nm (1.7-2.2 Lb-In)
Screw Size:	M2
Ingress Protection:	IP20
Material Flammability Rating:	UL94 V-0
Features:	Retention Latches (Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	-50°C ~ 120°C
Color:	Green
Wire Gauge or Range - mm²:	0.2-1.5mm²
Wire Gauge or Range - AWG:	16-28 AWG
Series:	Omnimate BC
Current - UL:	10A
Voltage - IEC:	320V
Current - IEC:	17.5A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screw - Clamping Yoke (Tension Sleeve)
Plug Wire Entry:	90°
Header Orientation:	--
Pitch:	0.150" (3.81mm)
Number of Levels:	1
Positions Per Level:	7
Number of Positions:	7
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks - Headers, Plugs, and Sockets are widely utilized in 1871440000 applications. Below is a broad overview of their function, form factor, and operation. Form FactorsTerminal blocks come in many form factors, ranging from miniature models used to reduce space and weight or accommodate small scale projects, to higher power models designed for heavy duty commercial applications. These blocks are also available as printed modular circuits (PMCs), which are used when larger sets of connections with greater complexity are needed.ConstructionTerminals are composed of separate terminals which can be isolated in order to reduce the scope of a connector. Individual terminals are supported and separated by plastic insulators to keep terminals in place and prevent current from being shorted. Terminals are then connected to each other through the appropriate pins. Connections can be designed with specific voltage and current ratings, wire gauge sizes, and breaking capacitance tolerance to best fit the application.FunctionTerminal blocks are used to connect two parts of an electrical system, either internally or externally. They are often used to facilitate connections between multiple connections posts, and are a necessary component in any electrical system. Terminal blocks can be used to splice multiple wires together, route power or signal through a circuit, form an electrical interface between two points in a system, or to allow for direct connection to a device, such as is commonly seen in the terminal posts on the back of many electronic devices.Work PrincipleTerminal blocks allow for current to pass through a connector by creating a connection between the appropriate pins in the block. Once the pins are correctly connected, voltage is sent through a conductor of a specific type, size, and tolerance. This voltage then passes through the individual terminals and is delivered to its destination device or part. This current must be sent through a conductor of the specified size and tolerance—if the current is too weak or too strong, the connector and any components connected to it can be damaged.Generally, terminal blocks fall into two categories—power and signal. Power terminal blocks are specifically designed to safely contain and deliver larger currents than signal terminals. They are also used to provide a connection directly to heavy electrical loads such as electric motors or other large machines, or to provide a connection to a power source such as a battery. Signal terminal blocks are designed to safely handle the delivery of low wattage signals, such as those used in audio equipment, digital displays, or instrument components.In conclusion, 1871440000 Terminal Blocks - Headers, Plugs and Sockets are necessary components in any electrical system and come in a variety of form factors to suit a variety of applications. They are used to connect one part of an electrical system to another, splice multiple wires together, and form a connection between two points in a system. The current must be sent through the right kind of wire of the correct size and tolerance—if the current is too weak or too strong, the connector and any components connected to it can be damaged. Power and signal terminals must be used in the correct way in order to successfully complete an electrical connection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description