1913073

Voltage - UL:	300V
Insulation Height:	1.024" (26.01mm)
Contact Tail Length:	--
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	7mm
Torque - Screw:	0.5-0.6 Nm (4.4-5.3 Lb-In)
Screw Size:	M3
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Mating Flange, Retention Latches (Non-Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	0.2-2.5mm²
Wire Gauge or Range - AWG:	12-30 AWG
Series:	COMBICON MVSTBW
Current - UL:	16A
Voltage - IEC:	630V
Current - IEC:	16A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screw - Clamping Yoke (Tension Sleeve)
Plug Wire Entry:	270°
Header Orientation:	--
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	3
Number of Positions:	3
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks - headers, plugs and sockets are an important component of many electrical systems. They are used to allow a variety of different connections to be made and allow terminal wiring without the need for very specialized tools or skills. 1913073 application field and working principle include the following:

Application Field

• Power distribution systems
• Signaling circuitry
• PCB Layout
• Lighting systems
• Instrumentation and control systems

Working Principle

Terminal blocks - headers, plugs and sockets are constructed with a base metal block. This block is then crimped, cut or formed to create the necessary contact points for the terminal. The contact points may be holes or pins and the block may be made from copper, brass, aluminum or stainless steel. Once the block has been created, it can be mounted onto a PCB or panel as a support for the wiring.The terminal blocks - headers, plugs and sockets are designed to provide a secure and reliable connection between two or more wires. They are typically used for either low-voltage power or data transmission. The application of the terminal blocks - headers, plugs and sockets depends upon the type of circuit being used. For example, they can be found in control systems, lighting systems, instrumentation systems, as well as in power distribution systems. Within a power distribution system, the terminals can be used to provide connections between mains power supply and various appliances or equipment.In most cases, the terminal must be compatible with the wire that is to be connected. If not, it could create an unsafe connection or lead to a short circuit. To make a connection, the terminal should be either crimped or soldered to the wire. When soldering, an appropriate soldering tip must be used as well as flux to ensure a good connection and to prevent corrosion. The wire must also be stripped to the correct length and bent the right way around the terminal.Finally, the terminal block should be securely fastened into position. This could involve either screws or clips depending on the application. It is important to ensure that the terminal is securely held, as any movement in the connection or block could create electrical faults or hazards. Terminal blocks - headers, plugs and sockets are widely used in a variety of applications. They provide a secure, reliable connection which allows for quick and easy installation. By following the correct procedure when installing and using them, they can work effectively and provide a long lasting connection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description