1943412

Voltage - UL:	300V
Insulation Height:	0.402" (10.20mm)
Contact Tail Length:	0.138" (3.50mm)
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Retention Latches
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	--
Wire Gauge or Range - AWG:	--
Series:	COMBICON IC
Current - UL:	10A
Voltage - IEC:	630V
Current - IEC:	16A
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	90°, Right Angle
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	12
Number of Positions:	12
Type:	Header, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks are versatile connection devices used to join two sections of electrical wiring either by direct or permanent connection. Their working principle is straightforward and can be divided into two main parts.First, the terminal block connects the positive and negative wires. The positive and negative wire runs through the terminal block and are connected to a corresponding pair of contact points. To ensure tight, secure connections, these contact points are designed with a range of features. This includes raised walls or tongues (tongue-and-groove), removable locking wings, and internal flux barriers.Second, the terminal block also provides a physical barrier between the wires. This is to protect the wires from any external sources of potentially damaging volts or currents, such as water, dust, or other forms of environmental pollution. This also prevents any accidental contact between two wires, reducing potential correlations that could cause electrical shock or circuit shorting.Terminal blocks - headers, plugs, and sockets - come in a variety of shapes, sizes, and designs, all serving different functions. Headers are terminal blocks with a flat contact surface on both sides, effectively acting as a connector. Plugs are used to connect individual wires with a socket side panel, like an electrical plug in a wall socket. Sockets are similar, but instead of plugs, they are used to connect two adjacent terminal blocks. They usually have electrical safeties built into them such as an air-gap, thermal fuse, or ground fault circuit.Headers are most commonly found in the industrial, engineering, and automotive fields. One of their most common applications is used as a bridge between a power source and the intended device, to distribute power evenly. This helps to reduce the strain on the wiring and makes it easier for technicians to diagnose and repair any electrical faults. Plugs and sockets are also widely used in high frequency applications, as they provide the lowest resistance connection between components, as well as added protection against external sources of interference.To provide optimum performance, these terminal blocks are typically made from highly durable materials such as, aluminum, brass, Nylon, or hard plastic. Depending on the application, some terminals are rated to cope with extreme temperatures, ultraviolet radiation or exposure to any corrosive-based liquids. Additionally, for safety reasons, they are usually rated in accordance with IEC 60529, to ensure operators or technicians are adequately protected.Terminal blocks - headers, plugs, and sockets - are used in a wide variety of applications and help to ensure efficient, safe and secure electrical connections. They are simple to install, provide high levels of protection, and are available in a range of sizes and styles to suite every project.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description