1951912

Mounting Type:	Through Hole
Features:	Mating and Mounting Flange
Contact Mating Finish:	Gold
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	--
Wire Gauge or Range - AWG:	--
Voltage - UL:	300V
Current - UL:	15A
Voltage - IEC:	400V
Current - IEC:	12A
Series:	COMBICON MSTB
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	90°, Right Angle
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	4
Number of Positions:	4
Type:	Header, Male Pins, Shrouded (4 Side)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks - Headers, Plugs and Sockets are the foundation of electronic wiring systems. They are used to connect wires and other electrical components together and to act as a junction point for signals and power. The type and size of these parts depend upon the current and voltage requirements, and the physical space of the wiring system.The use of terminal blocks can be traced back to 19th century when rubber bushings were used to connect the electrical lines. The most common type of terminal block that exists today is the header female block. This type of block can be used to connect several power lines or signaling wires together. The header block requires a male connector on either side to make the connection secure. These days, terminal blocks come in many designs and sizes. They are also made of a variety of materials, depending on their intended use. Many are made from plastic for convenience and easier installation. They are also available in copper or brass for heavier-duty applications. Terminal blocks are often used in the connection between a board or a printed circuit board. This type of block is designed to connect up to eight wires. They can be found pre-fitted with alligator clips, spade connectors, bananas, and pin jacks. These connectors allow the installation of components without having to solder connections directly to the board. Terminal blocks are also commonly used for industrial applications. They are used in a wide range of industries, including renewable electricity, HVAC, and industrial automation systems. Some of the industrial applications are designed to provide ease-of-use, reliability, flexibility, and wide-ranging environmental protection. The working principle of a terminal block is fairly simple. It provides a means of connecting wires in a secure manner. The terminal block consists of several pins, usually made of metal, that connect each wire to a connecting terminal. In the simplest of designs, the pin is crimped onto the connecting terminal and held in place. Connectors, plugs, and sockets are the different parts that form the terminal block. Connectors are usually made of plastic or metal and have two parts: the socket, which is the base of the block and the plug, which connects with the socket. The plug can either complete or break the connection, depending on its design. Plugs are used to securely hold the wire connections within the socket. These are made of metal prongs and are sometimes referred to as \'spade\' or \'contact\' plugs. They are secured within the socket by a nut and bolt, wing nut, or snap locking system.Sockets are the sections of a terminal block that allow the plugs to be connected. Depending on the application, they can be made of metal or plastic. The type of socket is determined by the type of plug used. Terminal blocks are a great way to ensure a secure connection between wires and other electrical components. Their simple and intuitive design makes them suitable for a wide range of applications. With the right design and components, they can be used to meet the demands of many different industries and applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description