1955565

Voltage - UL:	300V
Insulation Height:	0.472" (12.00mm)
Contact Tail Length:	0.102" (2.60mm)
Housing Material:	Liquid Crystal Polymer (LCP)
Contact Material:	--
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Pick and Place Cap
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Black
Wire Gauge or Range - mm²:	--
Wire Gauge or Range - AWG:	--
Series:	COMBICON CCV
Current - UL:	10A
Voltage - IEC:	400V
Current - IEC:	12A per position
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	Vertical
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	6
Number of Positions:	6
Type:	Header, Male Pins, Shrouded (2 Side)
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks are connecting components used to connect and disconnect circuits, either permanently or temporarily. They are commonly used in industrial and commercial applications, as well as in data and telecommunications, and in building automation. They are available in a variety of styles, sizes, and materials.Terminal blocks are typically mounted to a panel or enclosure and make a physical and electrical connection between two conductors. They are usually either 2-pole or 3-pole, with the center connecting the two poles. The outer two serve as either an anchor for a power supply or a female receptacle for connecting wires. Terminal blocks come in a variety of styles, including headers, plugs, and sockets. With a header, all that is required is the terminal block, male and female connectors, and the appropriate cable. A plug-style terminal block requires the male and female connectors, the appropriate cable, and the terminal block with the appropriate size opening for the plugs. A socket-style terminal block only requires the appropriate cable and the terminal block with the female receptacle. Terminal blocks are usually made of metal, such as aluminum, brass, copper, steel, or stainless steel, and can also be made from plastic, such as PVC. Depending on the terminal block, the contact points may be equipped with a plated or zinc coating to provide better insulation and reduce the chance of corrosion of the contacts. Terminal blocks are often used for direct contact with high voltage or high power electrical current, and are also used in conjunction with control panels, electronic components, and many other applications. Terminal blocks typically use a spring push or screw-in connector, or they can be mounted on a printed circuit board.When choosing a terminal block for your application, it is important to consider its current (amp) and voltage requirements. Most terminal blocks have a universal connector that can accommodate wires of various sizes and gauges. Additionally, you should also ensure that the terminal block is compatible with the system in which it is being used, since some systems may require special terminals or type of connector. When using terminal blocks, it is important to pay attention to the safety of personnel and equipment. Make sure that no live electrical current is touching any part of the equipment and that all connections are properly secured. Also, ensure that the amount of power and current that the terminal block can handle is sufficient for the application. The working principle behind terminal blocks is quite simple. They provide a physical and electrical connection between two conductors. This connection is usually made by inserting wires into the slots on the terminal block. Depending on the type of terminal block, the wires may be inserted into a male or female connector. The terminal block also provides insulation so that the current is regulated and not able to flow freely.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description