1956360000

Voltage - UL:	300V
Insulation Height:	0.665" (16.89mm)
Contact Tail Length:	--
Housing Material:	Polybutylene Terephthalate (PBT)
Contact Material:	Copper Alloy
Wire Strip Length:	7mm
Torque - Screw:	0.4-0.5 Nm (3.5-4.4 Lb-In)
Screw Size:	M2.5
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Ejector Latches, Retention Latches (Non-Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	-50°C ~ 100°C
Color:	Orange
Wire Gauge or Range - mm²:	0.2-4mm²
Wire Gauge or Range - AWG:	12-30 AWG
Series:	Omnimate BL
Current - UL:	20A
Voltage - IEC:	400V
Current - IEC:	23A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screw - Clamping Yoke (Tension Sleeve)
Plug Wire Entry:	180°
Header Orientation:	--
Pitch:	0.197" (5.00mm)
Number of Levels:	1
Positions Per Level:	3
Number of Positions:	3
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and SocketsTerminal blocks are devices used to join two electrical circuits to each other. They are used in a wide range of applications, from power supplies to industrial automation equipment. Terminal blocks are available in two main types, headers and plugs and sockets.Headers connect motor and machine-level devices and are typically found at the connection point between a circuit board and an external device. The header consists of columns of pins that mate to a connector or jumper on the back of the host device. A threaded nut is then used to tighten the connection. Headers are designed to reduce the time required to make electrical connections to a device.Plugs and sockets, in contrast, connect wiring between the same circuits on two sides of a panel enclosure. A socket has pins and a plug has male connections that fit into the pins. Socket and plugs are typically used in electrical control panels where simultaneous disconnection and reconnection is required.When selecting the type of terminal block to use for a specific application, it is important to consider both the type of wiring to be used and the current and voltage ratings for the device. Additionally, many terminal blocks are designed for easy installation with self-tightening screws or terminal blocks with built-in nuts.Terminal blocks can also be designed with safety features to protect the user from electric shock. They can be equipped with enclosures, overcurrent protection devices, extra long insulations, and even red and black coding on the terminals to indicate the polarity of the connections.The working principle of terminal blocks is based on their design and the material used. Generally, when two circuits are connected through a terminal block, the current from the power source flows through a wire and is then connected to a series of conductors that are laid out in parallel. A bridge wire creates a connection between each conductor and allows the current to pass from the terminal block to the circuit. The current then passes through the circuit and returns back to the power source.Terminal blocks are essential components of any electronic system and their use continues to increase in many industries due to their durability and cost-effectiveness. They come in a variety of shapes and sizes and can be utilized in many different types of applications. From low current to high currents, and from residential to commercial applications, terminal blocks provide a reliable and safe way to make electrical connections.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description