1972010000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and Sockets are widely used for electronic connections in many different applications. These components provide an electrical connection between two pieces of hardware, typically with a screw connection. They can be used in a variety of settings including controllers, circuit boards, control panels and relays.

One of the most common types of terminal block is the header type. These are typically mounted on or near the circuit board and provide a larger contact area for the screw connection. The header type is highly recommended for any sort of permanent connection, as it provides a secure connection that is relatively easy to install.

The plug type is designed for more temporary connections, as it is smaller and requires a specialized tool to remove the plug. It is ideal for connections that require frequent connections and disconnections, such as for data connections.

The socket type is the opposite of the plug type. It is used in many different applications such as in connecters for motor controllers or automotive applications. It is typically used in situations where there is not enough space for a plug or header type and a secure connection is desired.

Despite the fact that these three types of terminal blocks are widely used, their working principle is much the same. All three types of terminal blocks uses screws and nuts to secure and connect the two metal strips of the terminal. The contact points between the two metal strips tend to be larger than the other types of contact points available. This is to ensure a reliable and secure connection.

When using a header type, the finger contacts are inserted in the correct order by using a reversible screwdriver. The contact points on the header of the terminal block are usually made of stainless steel so they are corrosion resistant and provide a good electrical connection.

When using the plug and socket variety, the plug and socket must first be made secure. This is typically done by means of a connector block, which is screwed into the the plug and socket terminals. Once this has been done, the terminals can be connected by means of the screwdriver. The connection may then be secured by using the nuts and bolts provided. The nuts should be tightened up to ensure that the connection does not become loose over time.

Terminal blocks - Headers, Plugs and Sockets provide a reliable and secure connection for many different applications. While the types may differ in design, their working principle remains the same for all three. As with any electrical connection, these terminal blocks must be handled with care to ensure a reliable and safe connection.

The specific data is subject to PDF, and the above content is for reference