1973370000

Voltage - UL:	300V
Insulation Height:	0.894" (22.71mm)
Contact Tail Length:	0.126" (3.20mm)
Housing Material:	Polyamide (PA), Nylon, Glass Filled
Contact Material:	Copper Alloy
Wire Strip Length:	--
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	IP20
Material Flammability Rating:	UL94 V-0
Features:	Mating and Mounting Flange
Contact Mating Finish:	Tin
Operating Temperature:	-50°C ~ 120°C
Color:	Orange
Wire Gauge or Range - mm²:	--
Wire Gauge or Range - AWG:	--
Series:	Omnimate SC
Current - UL:	10A
Voltage - IEC:	320V
Current - IEC:	17.5A
Mounting Type:	Through Hole
Termination Style:	Solder
Plug Wire Entry:	--
Header Orientation:	90°, Right Angle
Pitch:	0.150" (3.81mm)
Number of Levels:	2
Positions Per Level:	13
Number of Positions:	26
Type:	Header, Male Pins, Shrouded (4 Side)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Headers, Plugs and SocketsTerminal blocks are electrical components that are used to electrically connect two or more electrical devices. They consist of threaded metal screws, terminal blocks, plugs, and sockets. The blocks are used as an electrical bridge between the components. They are used to provide power to the circuits.The most common application of a terminal block is for a consumer product or industrial device. The terminal blocks are connected between two electrical devices by terminals. They are often used as a switch in circuits, and they act as an electrical conductor for circuit boards.Terminal blocks have two main parts: the threaded terminal and the connecting terminal. The threaded terminal is the metal screw that is used to secure the terminal to the electrical devices. This is the part that is electrically connected to the electrical device. The connecting terminal is the part that connects the blocks to the component and allows electrical current to flow through the device.In a typical terminal block, the threaded terminal is placed on the circuit board, and the connecting terminal is attached to the connector. The threaded terminal is then tightened to secure it in place. The electrical current can then flow through the two terminals.Terminal blocks are usually used in applications where a large electrical current needs to be supplied to the electrical device. These applications include motors, electronics, and electrical power supplies.Terminal blocks are classified into two types: a single-ended and a double-ended block. Single-ended terminal blocks have a single threaded terminal, while double-ended blocks have two connected threaded terminals.Terminal blocks are also available in different shapes and sizes. Smaller blocks are used for low-current applications, while larger blocks are used for larger applications. These larger blocks are often able to handle more power.Terminal blocks are also available with multiple configurations. In these scenarios, a single block can be connected to multiple devices. This is ideal for larger applications, as it allows a single block to provide power to multiple devices.The terminal blocks are easy to install and maintain. All that is needed to install the block is a screwdriver and a few minutes of time. The terminals are then connected to the electrical device via a connector. To maintain the block, all that is needed is a cleanup brush to clean off any dirt or debris that may have built up on the block.The working principle of the terminal block is fairly simple. Electrical current is transferred from one electrical device to another device through the terminals. This current is sent out of the device, through the cable and into the electrical device, and then it flows back through the device after it is finished.In summary, terminal blocks are electrical components that are used to electrically connect two or more electrical devices. They consist of threaded metal screws, terminal blocks, plugs, and sockets. They are used to provide power to the circuits and are available in single-ended and double-ended configurations. They are easy to install, maintain, and use. They are ideal for larger applications as they allow a single block to provide power to multiple devices. Their working principle is simple; electrical current is transferred from one electrical device to another through the terminals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description