1975273

Voltage - UL:	300V
Insulation Height:	0.591" (15.00mm)
Contact Tail Length:	--
Housing Material:	Polyamide (PA), Nylon
Contact Material:	--
Wire Strip Length:	10mm
Torque - Screw:	--
Screw Size:	--
Ingress Protection:	--
Material Flammability Rating:	UL94 V-0
Features:	Mating Flange, Retention Latches (Non-Wire Side)
Contact Mating Finish:	Tin
Operating Temperature:	--
Color:	Green
Wire Gauge or Range - mm²:	0.2-2.5mm²
Wire Gauge or Range - AWG:	12-26 AWG
Series:	COMBICON FKCS
Current - UL:	10A
Voltage - IEC:	630V
Current - IEC:	12A
Mounting Type:	Free Hanging (In-Line)
Termination Style:	Screwless - Leg Spring, Push-In Spring
Plug Wire Entry:	180°
Header Orientation:	--
Pitch:	0.200" (5.08mm)
Number of Levels:	1
Positions Per Level:	3
Number of Positions:	3
Type:	Plug, Female Sockets
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks, headers, plugs, and sockets are a very important piece of our electrical and electronics infrastructure today. They provide a connection point for wires, cables, circuit boards, sensors, and other components, allowing data to pass between them. The 1975273 number is typically used for terminals, headers, and plugs that are found in wireless, low voltage applications.Terminal blocks, headers, plugs, and sockets come in a variety of styles and configurations. When selecting one for a particular application, the main consideration should be the voltage, current, and temperature rating that the device will need to withstand. Once those requirements are met, other factors such as size, type of connector, and material of construction should also be taken into consideration.It is also important to understand the working principles of terminal blocks, headers, plugs, and sockets. A terminal block is a type of electrical connection point which takes a single wire, cable, or other type of wire, and turns it into multiple connections. This is done using an array of terminals, usually connected together by a common terminal. The terminals can be made of metal, plastic, or other material, depending on the application.A header is similar to a terminal block, except it generally has one pair of connector pins instead of an array of terminals. It is used for branching an electrical connection, usually from a circuit board or sensor to multiple other pieces of equipment. Headers often have different types of connectors, including male and female pins, soldered or crimp connections, and others.The plug is also similar to a terminal block, but is typically found as a part of another type of equipment. It may be used for connecting two pieces of equipment together, such as a laptop and a monitor. Plugs come in a variety of materials, sizes, and configurations.Finally, the socket acts as the complement to the plug. Sockets are typically found as part of equipment such as wall outlets or power strips. They act as the receiving end for plugs, allowing the connection of two pieces of equipment. Sockets come in various sizes and configurations, depending on the type of socket and the type of plug it is expecting.In conclusion, terminal blocks, headers, plugs, and sockets have become an integral part of our electrical and electronics infrastructure. They provide a connection point for wires, cables, circuit boards, sensors, and other components, allowing data to pass between them. The 1975273 number typically applies to terminals, headers, and plugs in low voltage, wireless applications. It is important to understand the working principles of these components, as well as the electrical requirements for the application. By selecting the best type of terminal, header, plug, or socket for a particular application, it is possible to build an effective electrical system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description