1N2982A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N2982A belongs to a group of diodes known as Zener Single diodes. Zener diodes are designed to allow current to flow in one direction but to break down and allow current to flow the opposite direction when the reverse voltage reaches a specified level. The 1N2982A is unique in that its breakdown voltage is programmed for a specific value at the time of manufacture. This makes it perfect for use in voltage regulator circuits.

The 1N2982A consists of a heavily doped N-type semiconductor sandwiched between P-type layers. This PN-junction structure is reverse-biased as normal for a regular diode. However, the heavily-doped semiconductor material has an extremely low resistance that allows the electrons in the N-type material to move easily, allowing current to flow when a large enough reverse voltage is applied. This is the breakdown voltage, which is programmed to be much lower than the breakdown voltage of a standard diode.

The 1N2982A can be used in many different applications. It is commonly used to provide a constant voltage in power supplies, to protect sensitive electronic equipment from electrical surges, and to regulate the output of electronic circuits. In each of these applications, the breakdown voltage of the diode is utilized to regulate the output voltage, allowing for a consistent performance even under varying conditions.

The working principle of the 1N2982A diode is simple. When the reverse voltage applied to the diode exceeds its breakdown voltage, the resistance of the PN-junction drops significantly and a current will flow. This current is limited by the load, making the diode an ideal component for regulating voltage in circuits. By controlling the current, the voltage across the load can be regulated to the desired level.

In addition to its standard uses, the 1N2982A can be used in special applications such as switching, level detection, and frequency control. In switching applications, the diode is used to quickly switch a load on and off by allowing or blocking current flow. In level detection applications, the diode is used to detect when the voltage across a load exceeds a certain level and remain in that state until the voltage drops below the detection level. In frequency control applications, the breakdown voltage of the diode is used to help switch the frequency of an AC signal between two known points.

The 1N2982A is a versatile component that can be used in a wide variety of applications. Its breakdown voltage is programmed for a specific value and its low-resistance PN-junction structure allows current to flow when a large enough reverse voltage is applied. This makes it an ideal component for voltage-regulated circuits, switching applications, level detection, and frequency control.

The specific data is subject to PDF, and the above content is for reference