1N3337RB

Series:	--
Packaging:	Bulk
Part Status:	Active
Voltage - Zener (Nom) (Vz):	75V
Tolerance:	±5%
Power - Max:	50W
Impedance (Max) (Zzt):	9 Ohms
Current - Reverse Leakage @ Vr:	10µA @ 56V
Voltage - Forward (Vf) (Max) @ If:	1.5V @ 10A
Operating Temperature:	-65°C ~ 175°C
Mounting Type:	Chassis, Stud Mount
Package / Case:	DO-203AB, DO-5, Stud
Supplier Device Package:	DO-5
Base Part Number:	1N3337

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N3337RB is an example of a single Zener diode – a type of diode that controls the minimum voltage of a circuit, while allowing current to pass through it in both directions. The 1N3337RB has a reliable, low-temperature coefficient of 6.2V, and a maximum power dissipation of 200mW, making it ideal for use in a variety of applications.The primary practical applications for 1N3337RB include electrical protection and regulating, both for signal and power circuits. As a protection circuit, 1N3337RB diodes can be used to block voltage higher than the set threshold, ensuring that components connected to the diode are not overburdened or damaged by a higher voltage. This is often found in a variety of computer hardware, from sophisticated elements of a power supply such as voltage regulators, to simple circuits with low-power devices like capacitor-backed motors. In the role of a regulator, 1N3337RB makes sure input voltages don’t vary too much before powering a component, as in voltage dividers and current sources. 1N3337RB also play an important role in wave-shaping circuits, allowing only the small-amplitude portion of an AC or waveform signal to pass through them. This is useful in digital logic components such as flip-flops, as well as any circuit that relies on wave-shaping to function correctly.The 1N3337RB works by controlling a voltages in a number of ways. The lower limit, or "Zener voltage", is determined by a constant to which the diode is connected. When a current passes through the diode\'s "forward voltage drop" –the voltage that must be exceeded before an electrical current passes through–the voltage across the diode will not exceed the Zener voltage, even if the current is increased. Once the Zener voltage is reached, the diode stops any further current from passing and enters a "Zener breakdown" mode, effectively limiting the amount of voltage that enters the circuit. In addition, the 1N3337RB can be used as a "dynamic voltage drop device", allowing current to pass in either direction with no voltage drop while the voltage stays between the Zener voltage. This is highly useful in circuits with frequent changes in current, as it prevents disruption in power supply and causally helps with the functioning of circuits with fragile components. Furthermore, the 1N 3337RB contains a useful "clamping" or "limiting" ability. When the voltage going through the diode is above the Zener voltage, the difference between the two is dissipated as heat, automatically capping the voltage and helping to protect pieces of equipment that could be damaged by excessively high voltages.The 1N3337RB is a reliable, cost-effective solution for many applications. Its resistor-like properties, small size, and ability to be filtered make it an ideal choice for many functions, such as regulating a power supply, protecting circuits from excess voltage, or acting as a wave-shaping device. With its robust design, the 1N3337RB can provide reliable performance for a variety of functions.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description