1N4724

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

1N4724 is a general purpose, signal or small power rectifying diode. It has low maximum forward voltage drop and high speed reverse recovery time. The device is usually used for signal switching, power-supply circuits in general purpose applications and low voltage switching with high frequency control signal. The 1N4724 has a reverse breakdown voltage of 15 volts and a low forward voltage drop of 0.7 volts at the rated current. Low reverse recovery time makes it suitable for applications with high frequency switching.

The 1N4724 is a device made from a semiconductor material such as silicon or germanium. It is a two terminal rectifier which allows current to flow only in one direction, that is from anode to cathode. The device is often used in power supplies and other power circuits to prevent the flow of current in the reverse direction. The 1N4724 is configured as a diode, which means that its conduction is asymmetrical, meaning the device will not operate the same when current flows in both directions. It is used to block the flow of current in one direction and allow the flow of current in the other direction.

The working principle of the 1N4724 is based on the fact that it conducts electricity only when a voltage is applied to the anode and cathode. When a voltage is applied to the anode and cathode, the electrons in the material travel from the anode to the cathode, creating a current flow. When the voltage is reversed, the electrons flow in the opposite direction creating a current flow in the opposite direction. This allows the device to be used as a rectifier, to control the current flow in one direction.

The 1N4724 can be used in a variety of applications, including signal switching and general power circuitry. The device is most commonly found in switch-mode power supplies, where it is used to control the amount of current flowing through the device. It can also be used in gate drive circuits, where it is used to control the speed of a switching circuit by controlling the amount of current flowing through the device. The 1N4724 is also commonly used as a clamp device to limit the voltage passing through a circuit.

In summary, 1N4724 is a general-purpose rectifying diode with low forward voltage drop and reverse recovery time. It is usually used for signal switching, power-supply circuits, low-voltage switches and high frequency control signals. The device is configured as a diode, allowing it to conduct in one direction and block in the other. Its working principle is based on the fact that it conducts electricity only when a voltage is applied to the anode and cathode, allowing it to be used as a rectifier to control the current flow in one direction. The 1N4724 can be used in a variety of applications, including signal switching and general power circuitry.

The specific data is subject to PDF, and the above content is for reference