1N5932CPE3/TR8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

1N5932CPE3/TR8 is a single Zener diode which is an electronic component used to control the flow of current or voltage in a circuit. It is a type of diode specifically designed to be used in reverse breakdown, allowing a certain amount of current to flow in reverse direction and at a controlled voltage. The 1N5932CPE3/TR8 is a small-signal Zener diode which offers a nominal Zener voltage of 5.6V, a maximum power dissipation of 500mW and a maximum reverse breakdown current of 2mA. The 1N5932CPE3/TR8 is an ideal device for voltage regulation and as a voltage reference in various electronic circuits.

The primary use of a Zener diode is as a voltage regulator. This allows a load, such as a computer processor or a power supply, to be operated from a variable voltage supply, such as a battery or AC line, without the supply overshooting its maximum rating. A variable resistor is usually placed in series with the Zener diode to ensure the output voltage does not exceed the Zener voltage. The Zener diode then operates as a voltage reference and ensures that the output voltage does not exceed the set value. This type of circuit is also often used in power supplies and battery eliminator circuits. The 1N5932CPE3/TR8 is well-suited for use in these applications.

Another common application of the 1N5932CPE3/TR8 is as a voltage reference or detector. When a reverse-biased Zener diode is placed across a voltage source, the voltage across the diode will remain stable until the reverse breakdown voltage is exceeded, at which point the current through the diode will increase sharply. This property can be used to detect the presence or absence of a voltage source, or to create a reference voltage. For example, in a circuit with a power supply and a microcontroller, the Zener diode can be used to detect when the voltage has dropped below a certain level, and the microcontroller can then take action to shut down the system.

1N5932CPE3/TR8 can also be used to provide a voltage reference for temperature measurements. The temperature of a diode can be determined by measuring the voltage across it when it is in a reverse-bias state. Since the Zener voltage of the diode is relatively stable, it can be used as a reference for the measurement. A thermocouple or a thermistor can then be placed in series with the reverse-biased Zener diode and the voltage across it can be measured. Using the reference voltage of the Zener diode, the measured voltage can be used to infer the temperature of the thermocouple or thermistor.

In summary, the 1N5932CPE3/TR8 is a useful single Zener diode with a nominal Zener voltage of 5.6V and a maximum power dissipation of 500mW. This diode can be used in many applications, including voltage regulation and detection, as well as temperature measurements. It is an ideal device for voltage regulation and as a voltage reference in various electronic circuits.

The specific data is subject to PDF, and the above content is for reference