1N6167

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transient Voltage Suppression (TVS) diodes, commonly known as clamping diodes, are electrostatic discharge (ESD) protection devices that are used to suppress overvoltage transients and protect sensitive electronic equipment. The 1N6167 is a dual, unidirectional TVS diode designed to protect against electrostatic discharges (ESD) and other overvoltage transients.

The 1N6167 diode is designed to protect two-pin circuits such as USB and other low voltage communication port like 3.3V and 5V I/O ports. The diode can be applied to a maximum transient of 18V and surge current of 1A. It features an extremely low on-state resistance of 0.07Ω and a low storage reverse leakage current of 0.05μA.

The 1N6167 diode is a passive, two-terminal device used to protect circuits against transient voltage or current spikes. It is designed to provide protection by clamping or limiting the voltage across the protected lines to a safe level. The 1N6167 provides protection from static electricity, electrical discharge, lightning induced surge, and overvoltage transient. It can be placed between the power and logic ground to limit inrush current or placed between a data line and ground to protect the data signal from disruption. Its small, SMD package allows for easy installation into tight spaces.

The 1N6167 diode is manufactured with a voltage breakdown rating of 30V and a capacitance of 800pF. A Zener diode is used in conjunction with the 1N6167 in order to increase its ESD tolerance and to limit the peak voltage to a safer level. The 1N6167 diode is made of silicon and is available in an SOT23-6 package. The diode is designed to protect circuits from ESD discharge of up to 2kV, allowing for a wider range of ESD protection than other ESD protection devices.

The working principle of the 1N6167 diode is simple. When an overvoltage transient occurs in a protected circuit, the 1N6167 will shunt the current away from the circuit, thus reducing the voltage. This process is referred to as “snubbing”. The 1N6167 diode will also store the excess energy resulting from the overvoltage transient, preventing it from reaching the rest of the circuit and thus protecting the other components.

The 1N6167 diode is commonly used for ESD protection in communication ports such as USB ports, audio ports, and display ports. It can also be used in industrial and automotive applications as well as medical equipment and consumer devices. The 1N6167 diode is a simple and reliable way to protect circuits against transient overvoltage. It can be used in a wide variety of applications and is a cost-effective solution for ESD protection.

The specific data is subject to PDF, and the above content is for reference