1N974B Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are widely used in all types of electrical circuits. The 1N974B diode is a type of diode known as a Zener diode, and its application and operating principle will be discussed in this article.

A Zener diode is a type of diode that, when reverse biased, breaks down at a certain reverse voltage and results in a approximately constant voltage across the diode. In other words, a Zener diode can be used to regulate voltage over a given range. This makes the 1N974B perfect for applications where a stable voltage is desired.

The 1N974B has a breakdown voltage of 4.3V. This means that when the voltage across the diode goes lower than 4.3V, the diode breaks down resulting in a nearly constant voltage drop of 4.3V. In other words, the current passing through the diode will remain constant until the voltage reaches the breakdown voltage.

The 1N974B can be used for a variety of applications where a constant voltage is needed. For example, it can be used for voltage regulation in power supplies or as a voltage reference for other circuitry. It can also be used for voltage protection in circuits by preventing voltage from reaching a certain level. Additionally, the 1N974B can be used as an audio attenuator to reduce the volume of a signal coming from an audio amplifier.

The 1N974B is based on the same principle as a regular diode. When the diode is forward biased, electrons are pulled away from the cathode and a voltage drop takes place across the P-N junction. When the voltage across the junction is higher than the Breakdown voltage, the diode breaks down and electrons flow freely across the junction, resulting in a nearly constant voltage across the diode.

Using the 1N974B is relatively simple. It can be connected in series between two points in a circuit where a constant voltage is required. The 1N974B will then act as a voltage regulator, keeping the voltage across the diode at the breakdown voltage. It should be noted however, that if the voltage across the diode is ever higher than the breakdown voltage, the diode will break down and current will flow freely, resulting in excessive heat and possible damage.

In conclusion, the 1N974B diode is a type of Zener diode used for regulating voltage in various applications. It has a breakdown voltage of 4.3V, which means that when the voltage across the diode goes below 4.3V, the diode will break down and a nearly constant voltage of 4.3V will be applied across the diode. The 1N974B can be used for voltage regulation, voltage protection, and audio attenuation.

The specific data is subject to PDF, and the above content is for reference