1N992B BK

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A 1N992B BK Zener diode is an electrical component that is commonly used for limiting voltages or currents in a circuit. It can also be used in applications where it can convert alternating voltage to direct voltage. The diode has two terminals, a cathode and an anode, that are connected to the circuit. The diode has a voltage feedback characteristic, where the voltage applied across its terminals will increase until the voltage reaches a breakover point to cause the current flow through the device to stop. The breakover point is typically much higher than the rated voltage. The 1N992B BK has a breakdown voltage of 31.2 V and can handle a maximum current of 500 mA.

Working principle of the 1N992B BK Zener Diode – The working principle of the 1N992B BK Zener diode is that of a normal diode, but with some modifications. When the voltage across the Zener diode increases to the Zener voltage, the diode undergoes a breakover point, in which the diode “breaks over” from a low current to a high current. This allows a current to flow from the anode to the cathode. This current is regulated and limited to the rated current of the diode. The current is then regulated further by the voltage feedback characteristic, where the voltage across the terminals is held constant at the Zener voltage.

Applications of the 1N992B BK Zener Diode – The 1N992B BK Zener diode is used in a variety of applications, depending on its breakdown voltage. It can be used to regulate the voltage of a circuit, or to provide a steady voltage source in circuits requiring a constant voltage. The diode can also be used in reverse bias application to protect electronic circuits from high transient voltages. It is also used as a voltage regulator to protect sensitive electronic components from overvoltage surges or to “clamp” a voltage level in a low voltage DC power supply.

In summary, the 1N992B BK Zener diode is an electrical component that is used for limiting voltages or currents in a circuit, and for converting alternating voltage to direct voltage. Its working principle is based on the voltage feedback characteristic, where the voltage across its terminals will increase until the voltage reaches a breakover point and the current will stop. This diode can be used in a variety of applications, depending on its breakdown voltage, including voltage regulation, voltage clamping, and for protection from overvoltage surges.

The specific data is subject to PDF, and the above content is for reference