1PMT4100C/TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1PMT4100C/TR13 is a single Zener diode that is designed with a forward voltage drop of 4V. As a result, it is mainly used in applications where low current operation is needed or where higher operating voltages are required. The 1PMT4100C/TR13 is also suitable for high frequency applications.

The working principle of a Zener diode is based on the principle of avalanche breakdown. This phenomenon occurs when a high electric field is applied to a diode in a reverse biased condition such that the depletion region of the diode is reduced. As a result, electrons and holes are paired within the depletion region of the diode and create electron-hole pairs. The electrons and holes then collide with each other and emit energy in the form of photon. The energy of the emitted photons is high enough to create more electron-hole pairs and cause further current flow. This effect is called Zener breakdown.

In the case of the 1PMT4100C/TR13, the diode is designed to breakdown at 4V. This low reverse voltage means that it is mainly used in applications where low current operation is needed. It can also be used for high frequency applications since it has a relatively low capacitance value.

The 1PMT4100C/TR13 also has a low reverse leakage current, which is an important characteristic for the design of a Zener diode. Typical reverse leakage current is <5uA, which ensures that the diode does not dissipate too much power.

The 1PMT4100C/TR13 is mainly used in voltage regulation circuits, as it can provide a stable and reliable voltage source. It is also used in clamping circuits and as a protective device in power supplies. Additionally, it is often used as an avalanche diode in switching applications.

In conclusion, the 1PMT4100C/TR13 is a single Zener diode that is designed with a forward voltage drop of 4V. Its typical reverse leakage current is <5uA and it is mainly used in applications where low current operation is needed or where higher operating voltages are required. It is most commonly found in voltage regulation circuits, as well as clamping circuits, power supplies and switching applications.

The specific data is subject to PDF, and the above content is for reference