1PMT5928C/TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are a process by which current can be allowed to flow in one direction only. Zener diodes are a type of diode that is specifically designed to operate in reverse direction. They are normally used for voltage regulation, protecting the circuit from over or under voltage. The 1PMT5928C/TR13 diode belongs to the single zener diode family.

It is a unidirectional device with a breakdown voltage of 5.9V and thermal resistance of 13C/W. It is designed for use in commercial and industrial circuits. It has an absolute maximum power dissipation of 1.0 watt

The main application of 1PMT5928C/TR13 is voltage regulation. This diode can be used to maintain a regulated voltage in a circuit. Ideally it is used when the voltage supplied to the circuit can vary over a short time period, such as a power fluctuation. The Zener diode will then lower the voltage when it is too high and increase the voltage when it is too low. This helps to protect the circuit from damage due to excess voltage or current.

The general working principle of 1PMT5928C/TR13 is that when the voltage applied to its anode is greater than or equal to the specified breakdown voltage, a reverse breakdown current begins to flow from the diode\'s cathode to the anode. This current (often called Zener current) then flows through the Zener diode at the specified voltage. The current flowing through the Zener diode is then limited by an external resistor which is connected in series with the Zener. This resistor limits the current and thus prevents device failure due to static electricity.

The 1PMT5928C/TR13 diode can also be used to protect sensitive electronic circuitry from sudden power surges. By connecting the diode in reverse bias to the circuit, it can quickly clamp the voltage when it exceeds the diode\'s breakdown voltage. This prevents any damage from being done to the circuitry.

In conclusion, the 1PMT5928C/TR13 single zener diode is an effective device for voltage regulation and protecting sensitive electronics from power surges. It works by allowing a reverse current to flow when the voltage applied to the anode exceeds the breakdown voltage. This diode is commonly used in commercial and industrial circuits to protect against damage due to over or under voltage.

The specific data is subject to PDF, and the above content is for reference