1PMT5930E3/TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Zener - Single are electronic components that are used in a variety of electronics applications. The 1PMT5930E3/TR13 is one such diode that is used in applications where a controlled, reverse-voltage (Zener) breakdown is needed. The diode is often used to protect sensitive components from high voltage or current. In some applications, this diode is used to regulate the output voltage of an electronic circuit.

The 1PMT5930E3/TR13 is a single-diode, three-terminal switch. It has two input terminals and one output terminal. The two input terminals are the anode and cathode, and the output terminal is the Zener terminal. The Zener terminal is what allows the diode to perform the Zener breakdown. When the diode is under a reverse-bias voltage, the Zener terminal will break down and cause a spike in the current, thus allowing for the control of the output voltage.

When the 1PMT5930E3/TR13 is used in circuit protection applications, it will protect the electrical components from voltage and current spikes due to the reverse-bias breakdown. The diode can handle up to 30 volts of reverse-voltage, and a power dissipation of 500 mW.

In a voltage control application, the 1PMT5930E3/TR13 can be used to take the raw oscillating inputs and turn them into a regulated output. This is done by using the Zener breakdown to create a controlled voltage drop when the circuit is under high voltage. This in turn creates a steady output voltage, which is used to power the sensitive components.

The 1PMT5930E3/TR13 can also be used for rectifying AC signals. When an alternating current flows through the diode, it will cause the current to be blocked in one direction and allowed to pass in the other direction, thus creating a steady DC current.

Finally, the 1PMT5930E3/TR13 can also be used to create transient voltage suppressors. A transient voltage suppressor is an electronic device that is used to limit the peak voltage applied to electronic components. The transient voltage is created by a Zener breakdown in the diode. When the circuit is under a large voltage, the diode\'s Zener terminal breakdown and cause a current spike, thus limiting the peak voltage on the sensitive components.

In summary, the 1PMT5930E3/TR13 is a single-diode, three-terminal switch that is used in a variety of applications. These applications include circuit protection, voltage control, rectifying AC signals and transient voltage suppressors. The diode can handle up to 30 volts of reverse-voltage and a power dissipation of 500 mW. It is a great electronic component for a variety of applications.

The specific data is subject to PDF, and the above content is for reference