1PMT5932A/TR7

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Voltage - Zener (Nom) (Vz):	20V
Tolerance:	±10%
Power - Max:	3W
Impedance (Max) (Zzt):	14 Ohms
Current - Reverse Leakage @ Vr:	1µA @ 15.2V
Voltage - Forward (Vf) (Max) @ If:	1.2V @ 200mA
Operating Temperature:	-55°C ~ 150°C
Mounting Type:	Surface Mount
Package / Case:	DO-216AA
Supplier Device Package:	DO-216AA
Base Part Number:	1PMT5932

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Zener - Single - 1PMT5932A/TR7

The 1PMT5932A/TR7 is a type of single Zener diode and is a semiconductor device used for regulating voltages and controlling the flow of electrical current. It is a type of diode that operates in reverse bias and has a low, negative voltage across its anode and cathode. It is also known as a voltage regulator diode, and its main purpose is to ensure that the output voltage of an electrical device does not exceed a predetermined value, regardless of input voltage fluctuations or changes in load current.The 1PMT5932A/TR7 has a breakdown voltage of 5.6 volts and its maximum power dissipation is 800 milliwatts (mW). It has a low reverse leak current and the junction capacitance is very low. This diode also has a wide operating temperature range of -65 to +150 degrees C. The maximum temperature coefficient of the breakdown voltage is 0.11V/°C. The 1PMT5932A/TR7 is commonly used in a variety of applications. It can be used to establish reference voltage values for voltage regulators, voltage references, and current sources. It is also used to protect circuits from overvoltage spikes, prevent excessive current from flowing by establishing a minimum load, and clamp voltages within specified levels. It can also be used to reduce voltage to a set level for powering a host of low-voltage components. The 1PMT5932A/TR7 diode can also be used to regulate radio frequency (RF) signals in amplifiers, and plays a role in AC to DC power conversion.The working principle of the 1PMT5932A/TR7 is relatively straightforward. In normal operation, the current flow is from the anode to the cathode. However, when the voltage across the diode exceeds the breakdown voltage of 5.6V, the flow of current reverses, and this causes the stored charge in the junction to reduce, creating an electrical discharge across the diode. This allows for the flow of current in the reverse direction and the voltage is regulated to the Zener voltage. When the applied voltage is again reduced below the breakdown voltage, the current flows in the forward direction again. In summary, the 1PMT5932A/TR7 is a low cost, low voltage single Zener diode specifically designed to provide precision regulation of voltages and protection from overvoltage transients. It has a breakdown voltage of 5.6 volts and a maximum wattage of 800 mW, and it can be used in a variety of electronic applications where voltage regulation and protection is needed. This diode is also capable of withstanding wide variations in temperatures and its working principle is based upon the electrical discharge created when the applied voltage exceeds the rated breakdown voltage.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description