1PMT5943E3/TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1PMT5943E3/TR13 is a single Zener diode, either having a Zener voltage range of 6.8 to 75 volts. It has a Zener Impedance between 1.4 and 5.2 ohms. It also has a Power Dissipation of 350 milliwatts and a Forward Voltage of 1.1 volts. This diode can be used in a wide array of applications, including power supplies, regulators, and logic circuits. From a manufacturers’ standpoint, it is important to note that this diode is not suitable for use in high-voltage applications.

Zener diodes are a type of semiconductor device, allowing current to flow in one direction only. As a variation of the standard rectifier diode, the Zener diode allows current to flow in the opposite direction, a phenomenon known as Zener breakdown. This action happens when the breakdown voltage of the diode is exceeded. The diode then acts as a short circuit, allowing the current to flow freely in both directions across the diode.

In applications, the Zener diode acts as a voltage regulator, clamping excess voltage to a limit. The current applied to the diode is proportional to the voltage being regulated. Therefore, the diode will draw more current as the voltage rises. As a result, the diode will dissipate excess heat, and should be selected according to the power handling requirements of the application.

For single Zener diode applications, such as the 1PMT5943E3/TR13, the anode and cathode are connected in series to a load or power supply. Voltage is applied to the anode, with the cathode connected to the power supply or load. If the voltage to the anode exceeds the Zener breakdown voltage, the diode will clamp the voltage, until it is greater than the breakdown voltage again. This action limits the total voltage available to the load, providing the necessary voltage regulation.

The 1PMT5943E3/TR13 single Zener diode can provide effective voltage regulation in many applications. It is important to ensure that it is of adequate power to handle the voltage and current needs of the application, as well as providing sufficient heat dissipation for reliability. The 1PMT5943E3/TR13 is suitable for low-voltage applications, and should not be used in high-voltage applications.

The specific data is subject to PDF, and the above content is for reference