1PMT5956BE3/TR7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are semiconductor devices that are used to control the flow of electric current in a circuit. Zener diodes, in particular, are diodes that allow electric current to flow in one direction, while blocking current from flowing in the opposite direction. In addition, Zener diodes are designed to operate in a reverse-bias mode, meaning they block current until the voltage reaches a threshold level, at which point they begin to conduct.

The 1PMT5956BE3/TR7 is a particular type of Zener diode specifically designed for general purpose applications. It has a diode type of single, meaning it is composed of a single p–n junction. It is also a planar-passivated Zener diode, which means it has a special surface coating that helps to ensure proper impedance and low noise. Additionally, this Zener diode has a low forward voltage drop, meaning it has less of a current-limiting effect than other types of diodes.

The 1PMT5956BE3/TR7 has a maximum reverse voltage of 5.6 V and a maximum power dissipation of 500 mW. It also has a maximum reverse current of 250 μA and a maximum forward voltage of 1.2 V. Additionally, this Zener diode has a maximum Zener impedance of 10 Ω.

The 1PMT5956BE3/TR7 is typically used in voltage regulation circuits, which help to control the output voltage of a power supply in response to fluctuations in the input voltage. In this application, the Zener diode is connected in reverse-bias configuration between the input source and the output source. In this configuration, the Zener diode acts as a shunt regulator, essentially allowing some of the excess input voltage to be diverted away from the output. This helps to keep the output voltage from exceeding the set threshold level.

The 1PMT5956BE3/TR7 can also be used in addressable logic applications, where the Zener diode helps to regulate the voltage to the logic circuit. This helps to ensure that the logic circuit is not exposed to too high of a voltage, which could potentially damage the device. It is also used in circuit protection, as the Zener diode helps to protect the circuit from potential voltage surges or spikes.

In conclusion, the 1PMT5956BE3/TR7 is a single diode type of Zener diode that is designed for general purpose applications such as voltage regulation, addressable logic, and circuit protection. It has a maximum reverse voltage of 5.6 V and a maximum power dissipation of 500 mW, as well as a maximum Zener impedance of 10 Ω. Additionally, it has a low forward voltage drop, which helps to reduce the current-limiting effect that other types of diodes can have.

The specific data is subject to PDF, and the above content is for reference