1SD418F2-5SNA1200E250100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - Gate Drivers are electrical components that provide a driving force necessary to turn an insulated-gate field-effect transistor (IGFET) on or off. The 1SD418F2-5SNA1200E250100 is a highly efficient, low Noise, and low cost switching type Gate Driver suitable for switching power of up to 80V. It is mainly used in power-on/off stages in PDP and LCD TVs, computer peripherals and industrial equipment.

The 1SD418F2-5SNA1200E250100 Gate Driver has three basic components: a power MOSFET, a bootstrap diode, and a Gate drive circuit. The power MOSFET is the main switching device in the circuit. Its Gate pin is driven by the Gate drive circuit, which provides the driving current necessary to switch the power MOSFET on or off. The bootstrap diode ensures that the Gate drive circuit has enough voltage to properly turn on the power MOSFET.

The Gate drive circuit of the 1SD418F2-5SNA1200E250100 Gate Driver is composed of a relatively low distortion high-speed driver IC and an output stage high-speed power MOSFET. The input stage of the driver IC converts the logic level input signals into a high-speed pulse with a peak voltage of up to 18V. The output stage MOSFET then amplifies this pulse voltage to generate a high-current output drive signal. This amplified signal is then applied to the power MOSFET’s Gate pin to turn it on or off.

In addition to the power MOSFET, diode and gate drive circuit, the 1SD418F2-5SNA1200E250100 Gate Driver also contains several on-chip protection circuits such as an input limitation circuit, an over-current protection circuit and a short-circuit protection circuit. The input limitation circuit keeps the Gate drive voltage within a safe range to protect against over voltage and under voltage conditions. The over-current protection circuit monitors the current flowing through the power MOSFET and prevents it from exceeding a pre-determined limit. The short-circuit protection circuit trips when a short between the power MOSFET’s Gate and Source pins is detected and shuts off the power MOSFET.

The 1SD418F2-5SNA1200E250100 Gate Driver can be used in a wide range of applications such as on/off controls of motors, LEDs, lamps, and crankshafts. It also features a wide operational temperature range and is capable of handling high power and voltage levels. Its low EMI, low noise, and high efficiency make it well suited for industrial control, automotive and consumer electronics applications.

The 1SD418F2-5SNA1200E250100 Gate Driver is a cost-effective and reliable solution for a wide range of switching applications. Its integrated protection circuits and high-speed operation make it an ideal choice for applications where highest performance is required.

The specific data is subject to PDF, and the above content is for reference