2026-30-C3LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas discharge tube (GDT) arresters are a type of over-voltage protection device used to protect electronic circuits from electrical surges. In other words, they are designed to absorb or “arrest” excessive voltages or “surges” from reaching downstream electrical equipment. GDT arresters use high voltage capacitors to “clamp” the voltage level, which prevents any further current flow. The GDT arrester works to protect electronic equipment from hazardous surges, such as those caused by lightning strikes, power outages and power fluctuations.

The 2026-30-C3LF is a type of GDT arrester designed for use in medium-voltage (MV) electric power systems. It is a ten-year life device that provides reliable over-voltage protection and low interference levels. The arrester works by clamping the voltage level at a certain limit, which prevents any further current flow. The voltage limit can be adjusted by changing the capacitors inside the unit. The arrester is designed to have a response time of less than 0.5 microseconds, which allows it to quickly absorb any surges in voltage.

The arrester has three main components: the main cell, the control device, and the surge diverter. The main cell consists of a series of high-voltage capacitors, which can be configured to clamp the voltage at any given level. The control device is a resistor connected to a switch, which controls the level of current that can flow through the arrester. The surge diverter, also called the “spark gap”, prevents high voltages from reaching the main cell.

The arrester is designed to provide a wide range of protection for medium-voltage electrical circuits. It can be used with single-phase or three-phase circuits, and has a maximum operating voltage of up to 15 kV. The arrester is typically installed in areas where there is a high risk of lightning activity, and it is also widely used in the industrial and commercial sectors. The 2026-30-C3LF arrester is UL certified and is suitable for use in most major power systems.

In conclusion, the 2026-30-C3LF is a Gas Discharge Tube arrester designed for use in medium-voltage electric power systems. It works by clamping the voltage level at a certain limit, which prevents any further current flow. The arrester’s three main components are the main cell, the control device, and the surge diverter. The arrester is UL certified and its response time of less than 0.5 microseconds makes it suitable for various applications and for use in different types of electrical systems.

The specific data is subject to PDF, and the above content is for reference