2033-80-G5-LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Gas Discharge Tube Arresters (GDT)

Gas Discharge Tube Arresters (GDTs) are devices used to protect electrical equipment against damage caused by transient voltage surges. They are also referred to as Surge Protective Devices (SPD) or Transient Voltage Surge Suppressors.

GDTs are designed to protect electronic systems and components from high-voltage spikes, or transients, that can be created by lightning strikes, power outages, or other sources. GDTs typically consist of a series of metal-oxide varistors (MOV) encased in a protective tube. The MOVs act as a valve, allowing a continuous flow of electricity when the voltage is within limits. When the voltage spikes, the MOVs open up and absorb the surge. After the surge is dissipated, the MOVs close and the protection is restored.

2033-80-G5-LF Application Field and Working Principle

The 2033-80-G5-LF is an advanced version of GDT, designed for use in industrial and commercial applications. It has a wide operating temperature range, from -40°C to +90°C, and can handle up to 32kV of peak AC discharge energy. Its design improves on the typical MOV-based GDTs, with time-delay and surge current limiting components that reduce the risk of secondary damage.

The 2033-80-G5-LF features a ceramic housing with a sealed copper core. Inside the copper core are two metal-oxide varistors that are connected in series. The copper core allows for a large surface area for current to be transferred from the MOVs to the ground system. The metal-oxide varistors are connected to an external current-limiting device that helps limit the surge current levels.

When a surge is detected, the metal-oxide varistors activate, reducing the voltage spike to a safer level. This is done by dissipating the energy into the copper core, which acts as a grounding point. The current-limiting device limits the current to safe levels, reducing the risk of secondary damage caused by overcurrent. The 2033-80-G5-LF also includes a surge protection fuse, which will trip if the total amount of energy received is too high. This helps protect the system from further damage in the event of a major surge.

The 2033-80-G5-LF is ideally suited for industrial and commercial applications. It can be used in power grid systems, telecommunications systems, and other similar applications. It is designed to provide reliable protection against electrical surges, with a long life cycle and low maintenance requirements.

Overall, the 2033-80-G5-LF is an advanced version of GDT that provides reliable protection against electrical surges in industrial and commercial applications. It features a ceramic housing with a copper core, metal-oxide varistors, and a current-limiting device. Its protected fuse provides increased protection against major surges. With its wide operating temperature range, low maintenance requirements, and long life cycle, the 2033-80-G5-LF is an ideal choice for protecting against voltage surges.

The specific data is subject to PDF, and the above content is for reference