2056-35-B2FLF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube Arresters (GDTs) are an effective solution for mitigating lightning strikes and power surges. They are particularly important in telecommunications, power systems, and other dynamic electrical environments. The 2056-35-B2FLF is a GDT that provides voltage protection for these systems. It functions by safely limiting the voltage on a line in the event that lightning strikes or other transient activities cause a power surge.

This model GDT has two components – the tube and the voltage-limiting fuse. The tube itself is filled with gas that helps to control arcs and protect the device from the generated heat energy. The 2056-35-B2FLF has a breakdown voltage of 35 kV (kiloVolts) and a maximum discharge current of 28kA (kiloAmps) without any serious degradation. It has an insulated stand-off that helps to keep the GDT grounded in the event of arcing.

The voltage-limiting fuse is an important part of the 2056-35-B2FLF. The fuse functions to protect the device from overvoltage spikes, eliminating the need for additional circuit breakers or clamps. The fuse is designed to trip at a set voltage, typically lower than the device’s stand-off voltage, thus protecting the device from surges beyond its operation range.

In general, the working principle of the 2056-35-B2FLF is simple. When a voltage spike occurs, the fuse trips, either stopping or severely limiting the voltage through the GDT. The gas of the tube then works to dissipate the energy, further protecting the system from potential damage. When the incident is over, the fuse is reset, restoring normal functionality.

The 2056-35-B2FLF can be applied in a variety of applications. For telecommunications lines, they can be used to protect against lightning strikes and other voltage surges. For power systems, they are useful as fail-safe devices; in the event of an overvoltage event, the GDT will limit the voltage and prevent further damage to components. Similarly, they can be used in equipment spaces as a last line of defence against high voltage incidents.

The 2056-35-B2FLF is an excellent choice for voltage protection in telecommunications and power systems. Its combination of a voltage-limiting fuse and gas-filled tube helps to safely limit the voltage in the event of an incident. It is reliable, simple to install, and highly effective in its function.

The specific data is subject to PDF, and the above content is for reference