20KPA112C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transient voltage suppressors (TVS) are semiconductor devices that are designed to protect sensitive electronic components from extreme voltage spikes, which can occur in an electrical system. TVS diodes are components which have been designed specifically to reduce the effects of transient voltages on sensitive devices. The 20KPA112C is an example of a TVS diode.

The 20KPA112C is designed to provide protection against high voltage transients in both vehicles and portable electronics. It has two operating modes - the bidirectional symmetrical mode and the unidirectional asymmetrical mode. In the bidirectional symmetrical mode, the 20KPA112C acts as a diode bridge to protect against transients of up to ±40V on the input. In the unidirectional asymmetrical mode, it acts as an attenuator to protect against transients of up to 60V on the output. The 20KPA112C can handle currents up to 45A and is rated to operate up to a temperature of 105°C.

The 20KPA112C is capable of withstanding a wide range of transient voltages, making it suitable for protection in a variety of applications. In vehicles, it can be used to protect on-board diagnostic systems, airbag systems, and other sensitive systems from spikes generated by high energy sparks that occur during engine start-up. In portable electronics, it can be used to protect against sudden voltage increases that can occur when batteries are inserted into devices or when USB cables are connected. The 20KPA112C also has applications outside of automotive and portable electronics, including industrial systems, telecommunications, and medical equipment.

The 20KPA112C is a unidirectional diode which works by clamping the voltage across it. When a voltage spike over the diode’s breakdown voltage, typically around 5V, occurs, it starts to conduct and dissipates the excess energy as heat. This clamping action limits the peak voltage seen by the component that the diode is protecting.

The 20KPA112C is constructed from two symmetrical layers - an N-type semiconductor layer and a P-type semiconductor layer. The two layers are designed to act as a shunt regulator, with the N-type layer being able to handle positive voltage transients, and the P-type layer being able to handle negative voltage transients. This dual-layer construction ensures that the diode can handle a wide range of transient voltages.

In addition to the clamping action of the 20KPA112C, it also has two other features that help protect vulnerable components - ESD protection and transient surge protection. The ESD protection is designed to protect the component from electrostatic discharge, while the transient surge protection is designed to absorb energy from transients with short durations, such as lightning.

The 20KPA112C is a versatile and reliable solution for protection against transient voltages in a variety of applications. Its capability to handle a wide range of transient voltages, combined with its dual-layer construction and its additional features, make it an ideal choice for protecting sensitive components in a variety of systems.

The specific data is subject to PDF, and the above content is for reference