20KPA60C-B Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 20KPA60C-B is an electronic component used as a transient voltage suppressor (TVS) diode. It is designed to protect electronic components from destructive voltage spikes and transients. It is commonly used in various electronic applications where protection is needed from power surges, static electricity discharge, and lightning strikes.

The 20KPA60C-B is a unidirectional diode that is designed with two symmetric terminals. The anode terminal is connected to the positive voltage supply while the cathode terminal connects with the negative voltage supply. It is normally used to connect with the load side of a circuit and therefore, it provides protection for the load from transients.

The 20KPA60C-B has two critical functions: it begins to conduct current when the power supply voltage exceeds a certain amount; and it extinguishes current when the power supply voltage falls below another amount. When the voltage rises above the trip point, the diode will begin to conduct current. When voltage drops below the turn-off point, the diode will block current. By using this device, it is possible to prevent damage to electronic components by volts above or below specified limits.

The 20KPA60C-B has a peak pulse power dissipation of 10 kA and a hold down voltage of 6.2 volts. It also has a maximum operating temperature of 150°C and a maximum surge current of 20 amps. The device is also RoHS compliant for lead-free safe operation. In addition, it has a maximum storage temperature of 150°C and a maximum reverse leakage of 10 millamp.

The 20KPA60C-B is typically used in a variety of applications where protection from electrical transients is needed, such as in portable devices, automotive electronics, broadband communication devices, and home appliances, etc. It is an ideal choice for applications where extremely fast response times, low power losses, and small surface mounting areas are needed. By using this TVS diode, it is possible to ensure that transient voltages do not exceed the specified limits and thus avoid any kind of damage to sensitive electronic components.

The working principle of the 20KPA60C-B is based on the use of a Zener diode in series with a resistor. This diode works according to the principle of a Zener diode and provides overvoltage protection against peak currents. When a peak current is encountered, the Zener diode conducts current and the voltage across this diode is limited to a pre-defined voltage level. The resistor in parallel with the Zener diode lets an amount of current pass to limit the current and to limit the power dissipated by the TVS diode.

In conclusion, the 20KPA60C-B is an ideal choice as a transient voltage suppressor (TVS) diode for various applications that require protection from electrical transients. It is capable of protecting sensitive electronic components from power surges, current spikes, and static electricity discharge. It has a low power dissipation, fast response times, and small surface mounting area. In addition, it is backed by a solid warranty and is compliant with RoHS standards for lead-free safe operation.

The specific data is subject to PDF, and the above content is for reference