Allicdata Part #: | 21462169-ND |
Manufacturer Part#: |
21462169 |
Price: | $ 462.83 |
Product Category: | RF/IF and RFID |
Manufacturer: | Laird Technologies EMI |
Short Description: | SF-8.5 12X36 ECCOSORB |
More Detail: | N/A |
DataSheet: | 21462169 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 420.74600 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction
Radio Frequency Interference (RFI) and Electromagnetic Interference (EMI) is an integral part of the electronics industry. As such, shielding and absorbing materials are essential in order to protect sensitive electronic devices from interference. The 21462169 application field and working principle discusses the practical use and workings of RF and EMI-shielding and absorbing materials.Uses of RF and EMI-Shielding and Absorbing Materials
RF and EMI-shielding and absorbing materials are used to protect sensitive circuitry from RF and EMI noise. Shielding and absorbing materials operate by physically blocking, filtering, or absorbing emissions that interfere with the functioning of electronic components and circuits. Shielding and absorbing materials are used in various industries, such as telecommunications, automotive, and aerospace, for a variety of purposes, such as suppressing EMI/RFI signals, providing containment from RF fields, and providing electrical isolation.
In telecommunications, RF and EMI-shielding and absorbing materials are used to reduce EMI/RFI interference and ensure signal integrity in order to provide better signal quality and more reliable service. In the automotive industry, shielding and absorbing materials are used to reduce RF interference caused by engine operation in order to improve in-car communication and other electronic systems. In the aerospace industry, RF and EMI-shielding and absorbing materials are used to protect both on-board and off-board electronic components, such as those found in avionics, from RF and EMI interference.
Types of RF and EMI-Shielding and Absorbing Materials
RF and EMI-shielding and absorbing materials can be divided into two broad categories: conductive and non-conductive. Conductive materials, such as metals, are used for shielding, while non-conductive materials, such as ceramics and polymers, are used for absorption. Metals are usually the most effective shielding materials, as they can both reflect and absorb RF and EMI signals. However, these materials can be costly and difficult to work with and have limited flexibility.
Ceramic and polymeric materials, on the other hand, are less expensive, easier to work with, and have greater flexibility. Ceramics can be made with specialized absorptive properties and can be used for both absorption and shielding, while polymers have a wide range of absorbent properties that can be tailored to specific RF or EMI frequencies.
Working Principle of RF/EMI-Shielding and Absorbing Materials
RF and EMI-shielding and absorbing materials work by either reflecting or absorbing RF/EMI radiation. When using conductive materials for shielding, the radiation is either reflected or absorbed, depending on the frequency, angle of incidence, and material characteristics of the shield. Polymeric and ceramic materials, on the other hand, absorb the energy of the RF/EMI radiation in order to dampen it; this dampening effect is called attenuation.
Metals are typically the most effective shielding materials, as they can both reflect and absorb RF and EMI signals. In order to shield effectively, conductive materials must be very thick and as a result, these materials can be costly and difficult to work with. Ceramic and polymeric materials, on the other hand, do not require thick layers, making them much easier to work with and less expensive in the long run.
Conclusion
Radio Frequency Interference (RFI) and Electromagnetic Interference (EMI) is an integral part of the electronics industry. This is why RF and EMI-shielding and absorbing materials are necessary in order to protect sensitive electronic devices from interference. RF and EMI-shielding and absorbing materials can be divided into two categories: conductive and non-conductive. Metals are the most effective shielding materials, but they can be costly and difficult to work with. Ceramic and polymeric materials are more cost effective and easier to work with, but have limited flexibility. Shielding and absorbing materials operate by either reflecting or absorbing radio frequency or electromagnetic radiation, depending on the frequency, angle of incidence, and material characteristics of the shield. With the correct shielding and absorbing materials, sensitive electronic circuitry and systems can remain free from RF and EMI interference, ensuring high performance, reliability, and safety.The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MIKROE-2146 | MikroElektro... | 14.07 $ | 18 | HEXIWEAR COLOR PACK BLUE |
M39018/04-2146M | Cornell Dubi... | 71.22 $ | 1000 | ALUM-SCREW TERMINALAlumin... |
IEGH66-21468-008-V | Sensata-Airp... | 61.58 $ | 1000 | CIR BRKR MAG-HYDR LEVER |
IEGH66-21468-016-V | Sensata-Airp... | 61.58 $ | 1000 | CIR BRKR MAG-HYDR LEVER |
214660 | Wakefield-Ve... | 5.04 $ | 1000 | ROUND HEATPIPE 8X450MM 20... |
70152-2146 | Omron Automa... | 423.33 $ | 1000 | SAFETY EDGE |
ADZS-21469-EZLITE | Analog Devic... | 401.94 $ | 4 | KIT EVAL EZ LITE ADSP-214... |
91911-21469 | Amphenol FCI | 0.0 $ | 1000 | CONN HEADER 69POS 1MM VER... |
39-01-2146 | Molex Connec... | 0.62 $ | 3863 | CONN PLUG 14POS PANEL MOU... |
APL111-21469-9 | Sensata-Airp... | 0.0 $ | 1000 | CIRCUIT BREAKER MAG-HYDR ... |
UPG11-1REC2-2146-1 | Sensata-Airp... | 0.0 $ | 1000 | CIRCUIT BREAKER MAG-HYDR ... |
R29-21460-1 | Sensata-Airp... | 26.45 $ | 1000 | CIRCUIT BREAKER MAG-HYDR ... |
2146 SV005 | Alpha Wire | 410.68 $ | 3 | 2146 SILVER 100 FTTubular... |
219-4-21461-1 | Sensata-Airp... | 240.14 $ | 1000 | CIRCUIT BREAKER MAG-HYDR ... |
10-214616-4PLC | Amphenol Ind... | 53.85 $ | 1000 | CONN PLUG HSNG MALE 2POS ... |
219-4-21462-1 | Sensata-Airp... | 267.28 $ | 1000 | CIRCUIT BREAKER MAG-HYDR ... |
91900-21469LF | Amphenol FCI | 0.87 $ | 1000 | CONN HEADER 69POS 1MM VER... |
ADSP-21469BBC-3 | Analog Devic... | 0.0 $ | 1000 | IC DSP 32/40BIT 400MHZ 32... |
ADSP-21469KBCZ-3 | Analog Devic... | -- | 22 | IC DSP 32/40BIT 400MHZ 32... |
ADSP-21469BBCZ-3 | Analog Devic... | -- | 5 | IC DSP 32/40BIT 400MHZ 32... |
ADSP-21469KBCZ-4 | Analog Devic... | -- | 382 | IC DSP 32/40BIT 450MHZ 32... |
2146A 0101000 | Belden Inc. | 0.21 $ | 1000 | CAT6 4PR U/UTP CMR/CMX RE... |
91910-21469LF | Amphenol FCI | 0.0 $ | 1000 | CONN HEADER 69POS 1MM VER... |
91911-21469LF | Amphenol FCI | 0.0 $ | 1000 | CONN HEADER 69POS 1MM VER... |
91900-21469 | Amphenol FCI | 0.0 $ | 1000 | CONN HEADER 69POS 1MM VER... |
91910-21469 | Amphenol FCI | 0.0 $ | 1000 | CONN HEADER 69POS 1MM VER... |
21466169 | Laird Techno... | 23.7 $ | 1000 | SF-12.0 A11623 037-002419... |
21466167 | Laird Techno... | 117.87 $ | 1000 | SF-12.0 12X12 ECCOSORB |
21466268 | Laird Techno... | 132.94 $ | 1000 | SF-12.0/SS6M 12X12 ECCOSO... |
21460167 | Laird Techno... | 150.63 $ | 1000 | SF-7.0 12X12 ECCOSORB |
21462167 | Laird Techno... | 150.63 $ | 1000 | SF-8.5 12X12 ECCOSORB |
21460175 | Laird Techno... | 166.62 $ | 1000 | SF-7.0/SS6M 12X12 ECCOSOR... |
21462171 | Laird Techno... | 166.62 $ | 1000 | SF-8.5/SS6M 12X12 ECCOSOR... |
21463165 | Laird Techno... | 166.62 $ | 1000 | SF-9.0/SS6M 12X12 ECCOSOR... |
21462169 | Laird Techno... | 462.83 $ | 1000 | SF-8.5 12X36 ECCOSORB |
2146 | Greenlee Com... | 109.0 $ | 1000 | WHEEL (36745) |
21467 | 14.32 $ | 1000 | FILE CLEANER,10",CARD & B... | |
22-15-2146 | Molex, LLC | 0.55 $ | 1000 | CONN SOCKET STRIP RCP 14 ... |
214610FL REV A | ITT Cannon, ... | 0.0 $ | 1000 | DCMA62SZNMBK52 |
ADZS-21469-EZBRD | Analog Devic... | 0.0 $ | 1000 | KIT EVAL EZ BOARD ADSP-21... |
TAPE POLYMER RESIN 12.7MM 5/PK
SHEET PLYMR RESIN 25.4MM SQ 5/PK
SHEET FABRIC 19.1X101.6MM 100/PK
TAPE FABRIC COPPER 100/PK
FLEX SUPPRESSOR / NOISE SUPPRESS
MF500-117 .625X12X12 ECCOSORB