Allicdata Part #: | 21466169-ND |
Manufacturer Part#: |
21466169 |
Price: | $ 23.70 |
Product Category: | RF/IF and RFID |
Manufacturer: | Laird Technologies EMI |
Short Description: | SF-12.0 A11623 037-0024198-002 R |
More Detail: | N/A |
DataSheet: | 21466169 Datasheet/PDF |
Quantity: | 1000 |
43 +: | $ 21.54640 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RFI and EMI shielding and absorbing materials provide protection from electromagnetic interference. Shielding materials attenuate or reduce the impact of RFI and EMI by blocking the transmission of high frequency electromagnetic waves. Absorbing materials use an absorbent layer to dissipate the energy of the electromagnetic waves and reduce the interference.21466169 application field and working principle covers a wide range of applications, from military, aerospace, telecom and medical, to consumer electronics, automotive, and energy sectors. In a typical arrangement, the shield is placed between the RF source and the receiver. By enclosing the circuit with a shield, the RF signal is either blocked from entering the circuit or is attenuated to a level that it no longer causes interference. When a shield is properly installed and functioning it forms an effective barrier that negates external interference. Shielding materials are available in the form of metallic foils, woven metal meshes, fabric laminates, and conductive films. Each type of material provides a different level of protection, depending on the application. An absorbing material, on the other hand, is designed to absorb the RF energy. This type of material typically consists of an absorber layer on the outside of the material, which absorbs the radiation and dissipates it as heat. The absorber layer could be made from carbon, metal particles, or other materials that can absorb the specific frequency of radiation that is being used. The absorber material also provides a conductive path to dissipate the absorbed energy, which limits the amount of energy that reaches the circuit. An absorbing material can often provide the same level of protection as a shield, but without the need to build an enclosure around the circuit.Regardless of the type of material used, there are a few key factors that must be taken into consideration when designing a shielding or absorbing material system. These include the frequency of the electromagnetic radiation, the size of the area that needs to be protected, and the distance between the source and the receiver. Additionally, the materials used must be able to dissipate large amounts of heat, be resistant to corrosion, be cost effective, and should be light weight and should not reduce the performance of the system. When selecting the appropriate material for RFI and EMI shielding and absorbing, it is important to understand the different types of materials and their respective properties. Metallic foils, for instance, are typically made from aluminum, copper, or steel and provide excellent shielding capabilities for a wide range of frequencies. Woven metal mesh is often made up of small metal meshes and provides good EMI/RFI shielding as the metal grid structure prevents the passage of high frequency waves. Fabric laminates are composed of multiple layers of thin metallic sheets that are laminated together and provides excellent shielding performance. Lastly, conductive film is composed of multiple layers of thin conductive material, such as metal or carbon particles, which provides excellent shielding protection for both high and low frequency signals. In conclusion, 21466169 application field and working principle of RFI and EMI shielding and absorbing materials is a broad topic. There are a wide variety of materials available on the market, each with its own set of advantages and disadvantages. It is important to understand the type of radiation being shielded and the shielding requirements of the application before selecting the most appropriate material. Additionally, the environment in which the shielding system will be used should also be taken into consideration when selecting the material.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MIKROE-2146 | MikroElektro... | 14.07 $ | 18 | HEXIWEAR COLOR PACK BLUE |
M39018/04-2146M | Cornell Dubi... | 71.22 $ | 1000 | ALUM-SCREW TERMINALAlumin... |
IEGH66-21468-008-V | Sensata-Airp... | 61.58 $ | 1000 | CIR BRKR MAG-HYDR LEVER |
IEGH66-21468-016-V | Sensata-Airp... | 61.58 $ | 1000 | CIR BRKR MAG-HYDR LEVER |
214660 | Wakefield-Ve... | 5.04 $ | 1000 | ROUND HEATPIPE 8X450MM 20... |
70152-2146 | Omron Automa... | 423.33 $ | 1000 | SAFETY EDGE |
ADZS-21469-EZLITE | Analog Devic... | 401.94 $ | 4 | KIT EVAL EZ LITE ADSP-214... |
91911-21469 | Amphenol FCI | 0.0 $ | 1000 | CONN HEADER 69POS 1MM VER... |
39-01-2146 | Molex Connec... | 0.62 $ | 3863 | CONN PLUG 14POS PANEL MOU... |
APL111-21469-9 | Sensata-Airp... | 0.0 $ | 1000 | CIRCUIT BREAKER MAG-HYDR ... |
UPG11-1REC2-2146-1 | Sensata-Airp... | 0.0 $ | 1000 | CIRCUIT BREAKER MAG-HYDR ... |
R29-21460-1 | Sensata-Airp... | 26.45 $ | 1000 | CIRCUIT BREAKER MAG-HYDR ... |
2146 SV005 | Alpha Wire | 410.68 $ | 3 | 2146 SILVER 100 FTTubular... |
219-4-21461-1 | Sensata-Airp... | 240.14 $ | 1000 | CIRCUIT BREAKER MAG-HYDR ... |
10-214616-4PLC | Amphenol Ind... | 53.85 $ | 1000 | CONN PLUG HSNG MALE 2POS ... |
219-4-21462-1 | Sensata-Airp... | 267.28 $ | 1000 | CIRCUIT BREAKER MAG-HYDR ... |
91900-21469LF | Amphenol FCI | 0.87 $ | 1000 | CONN HEADER 69POS 1MM VER... |
ADSP-21469BBC-3 | Analog Devic... | 0.0 $ | 1000 | IC DSP 32/40BIT 400MHZ 32... |
ADSP-21469KBCZ-3 | Analog Devic... | -- | 22 | IC DSP 32/40BIT 400MHZ 32... |
ADSP-21469BBCZ-3 | Analog Devic... | -- | 5 | IC DSP 32/40BIT 400MHZ 32... |
ADSP-21469KBCZ-4 | Analog Devic... | -- | 382 | IC DSP 32/40BIT 450MHZ 32... |
2146A 0101000 | Belden Inc. | 0.21 $ | 1000 | CAT6 4PR U/UTP CMR/CMX RE... |
91910-21469LF | Amphenol FCI | 0.0 $ | 1000 | CONN HEADER 69POS 1MM VER... |
91911-21469LF | Amphenol FCI | 0.0 $ | 1000 | CONN HEADER 69POS 1MM VER... |
91900-21469 | Amphenol FCI | 0.0 $ | 1000 | CONN HEADER 69POS 1MM VER... |
91910-21469 | Amphenol FCI | 0.0 $ | 1000 | CONN HEADER 69POS 1MM VER... |
21466169 | Laird Techno... | 23.7 $ | 1000 | SF-12.0 A11623 037-002419... |
21466167 | Laird Techno... | 117.87 $ | 1000 | SF-12.0 12X12 ECCOSORB |
21466268 | Laird Techno... | 132.94 $ | 1000 | SF-12.0/SS6M 12X12 ECCOSO... |
21460167 | Laird Techno... | 150.63 $ | 1000 | SF-7.0 12X12 ECCOSORB |
21462167 | Laird Techno... | 150.63 $ | 1000 | SF-8.5 12X12 ECCOSORB |
21460175 | Laird Techno... | 166.62 $ | 1000 | SF-7.0/SS6M 12X12 ECCOSOR... |
21462171 | Laird Techno... | 166.62 $ | 1000 | SF-8.5/SS6M 12X12 ECCOSOR... |
21463165 | Laird Techno... | 166.62 $ | 1000 | SF-9.0/SS6M 12X12 ECCOSOR... |
21462169 | Laird Techno... | 462.83 $ | 1000 | SF-8.5 12X36 ECCOSORB |
2146 | Greenlee Com... | 109.0 $ | 1000 | WHEEL (36745) |
21467 | 14.32 $ | 1000 | FILE CLEANER,10",CARD & B... | |
22-15-2146 | Molex, LLC | 0.55 $ | 1000 | CONN SOCKET STRIP RCP 14 ... |
214610FL REV A | ITT Cannon, ... | 0.0 $ | 1000 | DCMA62SZNMBK52 |
ADZS-21469-EZBRD | Analog Devic... | 0.0 $ | 1000 | KIT EVAL EZ BOARD ADSP-21... |
TAPE POLYMER RESIN 12.7MM 5/PK
SHEET PLYMR RESIN 25.4MM SQ 5/PK
SHEET FABRIC 19.1X101.6MM 100/PK
TAPE FABRIC COPPER 100/PK
FLEX SUPPRESSOR / NOISE SUPPRESS
MF500-117 .625X12X12 ECCOSORB