235P-ENCL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

235P-ENCL can be classified as a Monitor-Current/Voltage-Relay Output device. This type of device is used to detect a power or current source, and then relay a signal if it detects an abnormality at its sensing point.

Given its ability to detect mechanical failures, overheated motors, and environmental problems, this device is suitable for a wide range of applications. The most common applications include motor and industrial control systems, environmental monitoring systems, and security systems.

The 235P-ENCL works on the principle of electromagnetic induction. It is able to detect changes in transducer signals that occur when either current or voltage is applied between two sensors. The device itself does not generate any electrical signals, instead it uses the electromagnetic fields generated by transducers to detect changes in either current or voltage.

When the detected change exceeds a preset value, the device sends an electrical signal to a relay, which then triggers an alarm or other action. The 235P-ENCL can be configured to respond to changes in either current or voltage, and can also be used to detect only positive or negative voltage changes.

The 235P-ENCL can be configured to respond to voltage and current changes of different frequencies and amplitudes. The device\'s frequency range is from 10 Hz to 10 MHz, and its voltage range is from 0.1Vpp to 250Vpp. It also has a wide range of selectable thresholds, allowing it to be set at different sensitivity levels.

For applications where higher precision is needed, the 235P-ENCL can be configured to respond to voltage and current changes of even smaller frequencies and amplitudes. The device\'s decision-making algorithm can also be adjusted to provide finer control.

The 235P-ENCL is equipped with two solid-state output relay contacts that can be used to control remote devices. These contacts can be programmed to respond to either a low or a high level, and can also be used to control different devices based on the input voltage or current level, or the output relay contact status.

The 235P-ENCL can be set up to perform self-testing to ensure that it is working properly and that the threshold settings are accurate. Additionally, the device is capable of monitoring two different input sources simultaneously, allowing it to monitor two different sensor points simultaneously.

Overall, the 235P-ENCL is an ideal device for monitoring current and voltage in a wide range of applications. Its ability to detect small electrical changes, its programmability, and its self-testing capabilities make it an invaluable part of many industrial operations.

The specific data is subject to PDF, and the above content is for reference