24C00/P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

24C00/P is a type of Memory which is used for storing data and commands with reliable, efficient and low-cost performance. This device provides a great solution for applications that require data to be stored for long periods of time and accuracy. The 24C00/P Memory is a low-voltage programmable static random access memory (SRAM) that can store up to 256 bits of data. It is also one of the few devices that utilizes a one-wire serial interface, popularly known as Maxim\'s 1-Wire protocol, which allows for communication between the 24C00/P and a wide variety of other ICs.

A few notable application fields of the 24C00/P Memory are data logging applications, microcontrollers, and portable data storage. These devices are often used in data logging applications, where an accurate record of data needs to be stored over an extended period of time. The 24C00/P can store up to 256 bytes of data which make it ideal for applications where a large amount of data needs to be stored with accuracy. These devices can also be used in microcontrollers, where the need for data storage outweighs the need for having a large on-chip memory. The small size and low power consumption of the 24C00/P makes it the ideal storage solution for these applications.

The 24C00/P Memory is relatively simple in terms of its design and operation. The device features a one-wire serial port for communication, a Clock Data System for data transfer, an address bus for unique device scanning, and 8 bytes of SRAM organized into 16Kbits of memory. The device is powered by a 3V supply and can handle both a write and read operation.

Writing data to the 24C00/P Memory is a relatively simple process. This is done by connecting SCL (Serial Clock) and SDI (Serial Data Input) pins to the correct voltage levels, making sure that the VSS (Ground) pin is connected. Once the device has been powered, the SCL pin is then pulsed Low twice, to initiate a communication between a connected device such as a microcontroller and the 24C00/P Memory. After that, the SCL pin is set High and the address of the 24C00/P memory is sent to the device via the SDI pin. After the address has been received, the actual data is then written to the 24C00/P Memory, following a strict protocol.

Reading data from the 24C00/P Memory is a slightly more complicated process but follows a similar pattern as writing data. Like writing, the process is usually initiated by pulsing the SCL pin Low twice to signal a communication. This is followed by sending the address of the device via the SDI pin. After the address is received, the contents of that address is then sent to the device. This process is repeated until all of the data stored in the 24C00/P Memory has been read.

The 24C00/P Memory provides a reliable, efficient, and low-cost solution for storing data and commands. Its one-wire serial interface, Clock Data System, and 16Kbits of SRAM makes the 24C00/P the ideal choice for applications that require data to be stored for long periods of time and accuracy. These devices are often used in data logging applications, microcontrollers, and portable data storage, which makes them a popular choice for many applications.

The specific data is subject to PDF, and the above content is for reference