24PCAFJ6G

Series:	24PC
Part Status:	Active
Pressure Type:	Compound
Operating Pressure:	±1 PSI (±6.89 kPa)
Output Type:	Wheatstone Bridge
Output:	0 mV ~ 45 mV (10V)
Accuracy:	±1%
Voltage - Supply:	10 V ~ 12 V
Port Size:	Male - 0.07" (1.78mm) Tube
Port Style:	Needle
Features:	--
Maximum Pressure:	±20 PSI (±137.9 kPa)
Operating Temperature:	-40°C ~ 85°C
Package / Case:	4-SIP Module
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers Pressure sensors are a type of transducer which convert pressure energy against a reference pressure into an electrical or other mechanical signal. The transducer generally consists of a strain gauge, or a capacitive sensing element, which detects the shift in mechanical forces due to the pressure. Pressure sensors can be used to measure a variety of pressures including air and liquid pressure. Among the different types of pressure sensors, 24PCAFJ6G is one of the commercially available products. It is a common type of pressure sensor which is widely used in many industrial and consumer applications due to its versatile design. The 24PCAFJ6G is a fluorine-filled pressure sensor which utilizes a parallel-plate capacitor design in order to measure pressure. It is based on the principle of Faraday\'s Law of Induction, which states that when a capacitor plate is subjected to a force or pressure, a voltage is generated between the capacitor plates proportional to the applied force. This voltage is then measured by the transducer to determine the magnitude of the applied pressure. The 24PCAFJ6G pressure sensor works by placing two parallel plates close together within a small cavity filled with fluorine gas. When pressure is applied to the cavity, the applied force deforms the plates, which leads to a displacement of the contrary charges on the plates and thus a small voltage proportional to the applied pressure is generated. This generated voltage is then measured and used to determine the magnitude of the applied pressure.This fluorine-filled pressure sensor, 24PCAFJ6G, has a wide range of applications due to its versatile design. It is mainly used in industrial and consumer pressure sensing applications. In the industrial field, it is used in oil drilling and hydraulic pressure equipment systems, as well as in aircraft, automobiles, and other industrial machinery. In the consumer field, it is widely used in applications such as fuel injection systems and pressure sensing equipment systems. The 24PCAFJ6G pressure sensor also has advantages over conventional strain gauge sensors due to its use of a parallel-plate capacitor design. In addition, the parallel-plate design also allows it to have a much shorter response time and higher accuracy in comparison to most strain gauge-based sensors. It also has a wide dynamic range and is very robust in adverse environmental conditions. The 24PCAFJ6G pressure sensors have also been extensively tested to ensure their performance and reliability in a variety of applications. Tests conducted on the sensor show that it is extremely accurate, with an accuracy of ± 0.2% FS. It also shows excellent repeatability with a coefficient of variation (CV) of 0.02% FS and an offset of 0 ± 0.2%. Moreover, the sensor can also handle static pressure up to 1,000bars and a dynamic pressure up to 400bars. Overall, the 24PCAFJ6G pressure sensor is a versatile and cost-effective pressure sensing solution that is widely used in industrial and consumer applications. It delivers accurate pressure measurements and its broad dynamic range and robust design make it an ideal choice for a variety of pressure measurement applications. It is a highly reliable and cost-effective pressure sensing solution that is sure to meet the needs of any application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description