25LC080DT-I/SN

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

25LC080DT-I/SN Application Field and Working Principle

The 25LC080DT-I/SN is a serial SPI bus EEPROM memory dedicated for battery-powered applications. It is widely employed in circuit designs for medium-sized projects due to its 8 kbit memory capacity and remarkable low power consumption.

Memory

The 25LC080DT-I/SN memory is based on a Kbit EEPROM integrated circuit (IC) technology. This chip integrates 8 Kbits of memory in an 8-pin package that includes a serial Peripheral Interface (SPI) bus. The 8 Kbits can be accessed via a serial data port, which allows byte-level reads and writes without additional control logic. This makes the memory extremely easy to design in.

The 25LC080DT-I/SN memory has an operating voltage range of 2.7V to 5.5V, making it suitable for battery-powered applications. It also features a 4KV minimum ESD rating and a temperature range of -40°C to 85°C, which makes the memory highly resistant to voltage and temperature fluctuations. Furthermore, the 25LC080DT-I/SN memory supports a wide range of read/write operations, including byte and sequential reads/writes, and has a low standby power consumption, making it ideal for low power applications.

The 25LC080DT-I/SN memory provides excellent read/write performance, with a maximum data transfer rate of 1Mbit/s. This is suitable for applications that require fast data transfer rates. In addition, the memory has a built-in self-timed write operation that automatically begins when the write enable signal is activated, making it ideal for applications that require frequent writes.

Working Principle

The 25LC080DT-I/SN memory works by converting an electrical signal into an analog signal. This is done by using two pins; the serial input (SI) and serial output (SO) pins. A variety of commands can be issued by the user in order to control the memory. These commands include read, write, erase, and acknowledge commands.

Read commands are used to read data stored in the 25LC080DT-I/SN memory. A read command is issued by sending an \'F\' (read) command over the serial interface. The memory then responds by sending back an 8-bit word containing the requested data. The data is sent back in 8-bit chunks, one chunk per read command.

Write commands are used to store data in the 25LC080DT-I/SN memory. A write command is issued by sending an \'E\' (write) command over the serial interface, followed by an 8-bit word containing the data that needs to be written. The memory automatically stores the data in the specified memory location.

Erase commands are used to erase data stored in the 25LC080DT-I/SN memory. An erase command is issued by sending an \'X\' (erase) command over the serial interface, followed by an 8-bit word containing the address at which the erase operation is to start. The memory automatically erases the data from the specified memory location.

Acknowledgment commands are used to indicate that data has been successfully stored in the 25LC080DT-I/SN memory. An acknowledgement command is issued by sending an \'A\' (acknowledge) command over the serial interface, followed by an 8-bit word containing the address at which the data has been successfully stored. The memory then sends back an 8-bit word containing the address at which the data is stored.

Applications

The 25LC080DT-I/SN memory is mainly employed in portable electronic devices, such as PDAs and handheld games. It can easily be integrated into circuit designs, thanks to its low power requirements, high read/write performance, and wide operating temperature range. It is also suitable for automotive applications where frequent write operations and low power requirements are required.

In addition to the abovementioned applications, the 25LC080DT-I/SN memory can also be used in medical systems where reliable data storage is a must. The memory has an impressive data protection system that ensures the data stored in it is safe from accidental erasure or corruption. This makes it a great choice for safety-critical applications.

In conclusion, the 25LC080DT-I/SN memory is an excellent choice for circuit designs that require low power consumption, high read/write performance, wide operating temperature range, and reliable data protection. With its impressive features and wide range of applications, the 25LC080DT-I/SN memory is an ideal choice for medium-sized projects.

The specific data is subject to PDF, and the above content is for reference