25LC160DT-E/MS

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Memory Type:	Non-Volatile
Memory Format:	EEPROM
Technology:	EEPROM
Memory Size:	16Kb (2K x 8)
Clock Frequency:	10MHz
Write Cycle Time - Word, Page:	5ms
Memory Interface:	SPI
Voltage - Supply:	2.5 V ~ 5.5 V
Operating Temperature:	-40°C ~ 125°C (TA)
Mounting Type:	Surface Mount
Package / Case:	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package:	8-MSOP
Base Part Number:	25LC160D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

25LC160DT-E/MS: Introduction to Memory Field Application and Working Principle

What Is A 25LC160DT-E/MS?

The 25LC160DT-E/MS is a low-voltage Serial Electrically Erasable Programmable Memory (EEPROM) chip designed for use in industrial, consumer and automotive applications. The 25LC160DT-E/MS is a 16K-bit Serial EEPROM which provides high performance, power-efficient memory storage. It is a versatile and cost-efficient solution for a wide range of applications where reliable data storage beyond the capabilities of standard SRAM is required.

Applications of 25LC160DT-E/MS

25LC160DT-E/MS memory chips are widely used in many different industrial and consumer applications. In industrial applications, the chips are used to store data in or transfer data between standalone automations, robots, machine tools, controllers and processors. In consumer applications, they are often used in portable devices such as PDAs, cell phones, travel routers, multimedia players, digital cameras and GPS devices. The 25LC160DT-E/MS memory chip can also be used in automotive applications such as automotive telematics.

Benefits of 25LC160DT-E/MS

The 25LC160DT-E/MS provides a number of benefits to its users. Firstly, it is a low voltage device and thus can be used in applications where power is at a premium. Secondly, it offers an efficient serial interface for chip to chip communication. Thirdly, the device is extremely fast to access, with a single-byte write time of 5 milliseconds and a self-timed single-byte read time of 9 milliseconds. Lastly, the 25LC160DT-E/MS offers extremely low power consumption in active and standby modes, making it a preferred solution for low-power applications.

Features of 25LC160DT-E/MS

The 25LC160DT-E/MS offers a number of features such as:

• High-speed write/read performance
• 1.8, 2.5 or 3.3V supply voltage options
• Serial peripheral interface compatible with the SPI Standard
• 16K-bit, 256-byte page size with byte-level write capability
• Self-timed read operation capable of accessing memory at a 1MHz Clock rate
• Software write protection of the entire memory array or individual sectors
• Data reliability with 10,000 write/erase cycles

Working Principle of 25LC160DT-E/MS

The working principle of the 25LC160DT-E/MS is based on the Serial Peripheral Interface, or SPI. This is a synchronous serial communication interface designed to allow data to be clocked in and out of the 25LC160DT-E/MS memory chip. The SPI interface is based on two signals, a serial clock signal (SCLK) and a serial data signal (SDO). By clocking the data in and out of the chip in synchrony with the SCLK signal, both the reading and writing operations of the device can be done in a simple and reliable way.The 25LC160DT-E/MS EEPROM device is also equipped with four control pins, of which one is used as an active low write enable pin (WRL), one is used as chip select (CS) and the other two are used to select the read and write operations of the chip (A0, A1). By setting the pin levels between the three pins, the operational mode of the 25LC160DT-E/MS can be controlled.

Conclusion

The 25LC160DT-E/MS is a low-voltage Serial Electrically Erasable Programmable Memory (EEPROM) chip designed for use in industrial, consumer and automotive applications. It is an efficient, versatile and cost-efficient solution for storing and accessing data, and offers an array of features such as high-speed write/read performance, low-power consumption, software write protection and more. The chip is based on the Serial Peripheral Interface, or SPI, which provides a synchronous serial communication interface for data clocking in and out of the 25LC160DT-E/MS.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description