2900130

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

2900130 Application Field and Working Principle

2900130 Controller Assemblies are primarily used in industrial, commercial, residential or automotive applications. Their primary function is to control electrical current, voltage, and power, in order to provide safety within an industrial workplace or home.

The working principle of 2900130 controllers can be broken down into two main components: the power input and the power output. They essentially act as a switch that connects and disconnects an electrical circuit when commanded. When power is supplied to the input, it is then switched to the output when certain conditions are met, such as over-current, undervoltage, or overvoltage. This allows for protection of any downstream devices or components.

In 2900130 assemblies, the power input is usually a three-wire system which consists of a common, a normally open, and a normally closed contact. The common is the actual conductor of electricity straight from the load. The other two contacts are the control contacts which, depending on their state, will either connect or break the current to the load. Every 2900130 controller has a threshold limit at which the contacts will switch, enabling a change from an open to a closed state.

The power output is the same as the input with the addition of a control terminal. This control terminal is used to give the controller instructions to either switch off or on the electrical current which is flowing.

At each power controlled point, a 2900130 controller is typically connected to a control system, usually a PLC or DCS. The type of controller used to identify whether the controller should switch the load or remain in the state it is currently in is known as a logic controller. After the logic controller has identified that the current should be either switching on or off, it sends the instruction to the 2900130 controller.

In summary, the 2900130 Controller Assemblies are primarily used in environmental and safety applications for controlling currents, voltages, and power. They are equipped with a power input and power output that are wired together and included in a power control system, typically the PLC or DCS. A logic controller is used to define when to change the state of the controller by determining when to switch on or off the electrical currents.

The specific data is subject to PDF, and the above content is for reference