2905187

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid state relays are electric relays that use semi-conductors such as transistors or thyristors instead of electromagnetic coils to turn on and off a load. The 2905187 solid state relay is a single-phase device designed for low current applications, and is suitable for switching resistive, capacitive, and inductive loads. It is typically found in medical equipment, communications, and industrial automation applications.

The 2905187 uses an opto-isolator to provide galvanic isolation between the input and output circuits. This opto-isolator contains a LED that connects to the control circuit and is used to activate the TRIAC or MOSFET switch. The TRIAC or MOSFET switch then drives the output circuit. The TRIAC or MOSFET is rapidly switched on and off at a frequency determined by the input voltage to control the average current to the load.

The working principle of the 2905187 solid state relay is relatively simple and is based on the voltage-controlled, zero-voltage switching (ZVS) method. When the control voltage is applied to the opto-isolator, the LED activates and emits light, which is received by the photodiode in the opto-isolator. This causes the TRIAC or MOSFET to be switched on, and then the output circuit is driven and the load is powered.

When the control voltage is removed, the TRIAC or MOSFET is switched off and the load is no longer powered. The TRIAC or MOSFET is responsible for providing zero voltage switching. This is because the TRIAC or MOSFET switches on only when the voltage across it is zero, thus eliminating any risk of unwanted noise or interference. Additionally, the zero voltage switching helps to reduce the power consumption of the solid state relay.

Due to its low current capability, the 2905187 solid state relay can be used in low power applications. This makes it well-suited for applications that require reliable switching in the presence of high interference. Additionally, the use of an opto-isolator and zero voltage switching makes the relay highly reliable by eliminating the risk of unwanted noise or interference.

In conclusion, the 2905187 solid state relay is an ideal choice for applications such as medical equipment, communications, and industrial automation. It uses an opto-isolator to provide galvanic isolation between the input and output circuits, and uses the zero-voltage switching (ZVS) method to provide reliable switching. As such, the 2905187 solid state relay is well-suited for reliable switching in the presence of high interference.

The specific data is subject to PDF, and the above content is for reference