2982676

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays

A solid state relay (SSR) is an electronic switching device with no moving parts that permits and limits the amount of current passing through a circuit. It uses a semiconductor device such as a transistor to control a current passing through a solid-state element, resulting in a better response time compared to mechanical relays.

SSRs are suitable for applications where low power control is needed, such as controlling the speed of a fan or the brightness of a light, or in consumer electronics. They are also used as an interface between digital and analog signals, and for controlling multiple outputs in response to a single input. SSRs can also be used to power an electrical device from an AC or DC power source, such as a computer or other electrical equipment, providing safe isolation between the device and the power source.

SSRs are often used in industrial applications, such as controlling electric motors, controlling the temperature of devices using temperature controllers, and controlling the pressure and flow of fluids. The most common type of SSR has an isolated output that can be used to switch on and off an AC load. This type of SSR typically has a voltage rating of up to 600 volts at currents of up to 10 amps, and can control both AC and DC loads. Some SSRs also have an isolated input, enabling the relay to be triggered by a signal source, such as a PLC.

The working principle of an SSR is based on a solid state element that turns on and off depending on the control signal. A control voltage is applied to a control port of the SSR, such as a gate port of a TRIAC, which in turn turns the TRIAC on or off. When turned on, the TRIAC will allow current to pass through and power the load. When turned off, the TRIAC will block the current and the load will not receive power.

Some SSRs also have optically-isolated outputs, providing isolation between the input and output circuit so that the input signal is not affected by electrical noise or other disturbances. The optical isolation also ensures that the control voltage is not affected by the voltage or current fluctuations on the output side. Some optically-isolated SSRs also have zero-crossing control, which ensures that output current is switched off before it reaches its peak, thus preventing damage to the load.

Generally, SSRs are cheaper than mechanical relays, as they have no moving parts and have a lifespan of up to 10 million operations. Additionally, they are more reliable than mechanical relays, as they are less affected by shock and vibration, and have faster response times. SSRs are also easier to install, as they can be mounted directly onto a circuit board.

Overall, SSRs are an attractive choice for applications where low power control is desired, as they require minimal maintenance, are reliable and have fast response times. They are also suitable for applications where isolation between the input and output circuits is required, such as when dealing with electrical noise or other disturbances.

The specific data is subject to PDF, and the above content is for reference