2EZ5.1D2E3/TR8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A 2EZ5.1D2E3/TR8 diode is a single, Zener diode consisting of an arrangement of two separate diodes connected in reverse-parallel across a single terminal. Depending on the manufacturing process employed, the 2EZ5.1D2E3/TR8 typically features a total dynamic resistance of 5.1 ohms, with a breakdown reverse-bias voltage of 2.3 Volts.

2EZ5.1D2E3/TR8 diodes function as a means of providing more precise control and precision in the limiting of voltage applied to systems. In its basic mode of operation, the diode setups prevent the elective load from receiving more voltage than what is allowably safe (the breakdown voltage, in this case). In certain special circumstances, the device can be arranged to function in reverse, enabling the regulator of voltage-based systems.

In general practice and application, 2EZ5.1D2E3/TR8 diodes are typically used in areas such as protection of equipment connected to an AC power source,rectifying high-powered antenna systems, as protective as well as regulating devicesin power supply systems, or DC-DC converters in LED or lighting devices. This Zener diode also functions as a voltage reference for instrumentation and conditioning circuits, and is installed in current-limiting and regulating devices like multiplier regulators and radio-frequency amplifiers.

When employed, the 2EZ5.1D2E3/TR8 device enables the regulating and protection of large currents, typically allowing it to maintain its regulation properties even when under the presence of current fluctuations. In addition, the diode is both shock-resistant and humidity-resistant, making it suitable for many industries, as well as satisfying the VDE safety standard requirements.

The working principles which drive the 2EZ5.1D2E3/TR8 diode are based on the general setup of a Zener diode, consisting of two separate Si-diodes connected in reverse-parallel across a single connection point. In its off-state, the device acts as an open circuit which prevents current from flowing, while allowing voltages up to the breakdown voltage; in its active state, the device functions as a closed circuit which both dissipates reverse-bias and maximum current.

At the breakdown voltage, the device begins to conduct through reverse-bias, leading to a rectifying frequency which corresponds to the pulse-width modulated information. In turn, the device controls the flow of current depending on the frequency,and operates with little to no distortion (0.1 percent, typically). In addition, the diode is capable of being used alone or in series with other similar devices.

In conclusion, the 2EZ5.1D2E3/TR8 diode is a single, Zener type device suitable for a range of applications that require the regulation or protection of large currents. Primarily used for protection of equipment connected to an AC power source, rectifying high-powered antenna systems and voltage referencing for instrumentation and conditioning circuits, the diode has a total dynamic resistance of 5.1 ohms and a breakdown reverse-bias voltage of 2.3 Volts which enable it to provide precise control and precision in voltage limiting. With a low distortion factor and its ability to be used in series, the 2EZ5.1D2E3/TR8 diode functions as an effective and efficient protection device.

The specific data is subject to PDF, and the above content is for reference