2KBP02ML-5301E4/72

Series:	--
Packaging:	Bulk
Part Status:	Obsolete
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	200V
Current - Average Rectified (Io):	2A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 3.14A
Current - Reverse Leakage @ Vr:	5µA @ 200V
Operating Temperature:	-55°C ~ 165°C (TJ)
Mounting Type:	Through Hole
Package / Case:	4-SIP, KBPM
Supplier Device Package:	KBPM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

A 2KBP02ML-5301E4/72 rectifier bridge is a type of diode that is commonly used in electronics. It consist of four diodes connected in a bridge pattern, and can be used to convert AC power into DC power. They are widely used in consumer electronic products such as power converters, battery chargers and chargers for mobile devices. In this article, we will discuss the application field and the working principle of the 2KBP02ML-5301E4/72 rectifier bridge.

Application Field

The 2KBP02ML-5301E4/72 is used in a wide range of applications in consumer electronics. It is used to convert alternating current (AC) power into direct current (DC) power. It is ideal for power supplies and charging circuits where high current and low voltage is required. It is also used as a continuous power switch in applications such as motor control and switching circuits.

Working Principle

A bridge rectifier is an electronic circuit composed of four diodes connected in a network. The diodes are connected in a pattern known as a “bridge”. This bridge rectifier will convert alternating current (AC) power into direct current (DC) power. When an AC voltage is applied to the bridge rectifier, the diodes will only allow current to flow in one direction. For the 2KBP02ML-5301E4/72 rectifier bridge, the diagram below shows how the four diodes are connected to the AC power source: When the AC source is positive, the diode D1 will be forward-biased, allowing current to flow from the positive terminal of the AC source, through diode D1, and out to the load. When the AC source is negative, diode D2 will be forward-biased, allowing current to flow in the opposite direction. This process will repeat, creating a unidirectional waveform that is the same as a direct current (DC) waveform.

Conclusion

The 2KBP02ML-5301E4/72 is an ideal bridge rectifier for consumer electronic applications that require high current and low voltage. It is a four-diode electronic circuit that is capable of converting AC power into DC power, providing a unidirectional current. Its application field includes power supplies, chargers for batteries, and motor control and switching circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description