2KBP06M-M4/51

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are commonly used to convert alternating current (AC) to direct current (DC). Bridge rectifiers are particular types of diodes that are often used in AC to DC power supplies to produce a smooth, consistent DC voltage. As its name implies, the 2KBP06M-M4/51 bridge rectifier is a bridge type of rectifier, which is a key component in many electronic circuits, such as in DC motors and other AC-to-DC conversion applications. In this article, the application field and working principle of the 2KBP06M-M4/51 bridge rectifier will be discussed.

The 2KBP06M-M4/51 bridge rectifier is designed for use with high surge current rectification applications and is suitable for both low and high power conduction operations. It has a guard circuit that allows for improved surge current performance and can achieve up to 4A of continous output current. The 2KBP06M-M4/51 is designed to provide seamless single-phase AC to DC conversion in the range of 50 Hz to 450 Hz with peak ON-state voltage equal to 700V.

A bridge rectifier consists of four diodes connected in a bridge circuit. A bridge rectifier can be used in AC-to-DC (alternating current to direct current) conversion and also acts as a voltage doubler. In a bridge rectifier, each diode is connected in series with another diode and two are connected in parallel with two others, forming a bridge. An AC current flows through two of the diodes at the same time, so each of them conducts during alternate half cycles of the input AC voltage. This alternation in flow of current through the diodes produces a pulsating DC current at the output.

The 2KBP06M-M4/51 bridge rectifier is mainly used in electric vehicles, electric tools, heating/air conditioning, electric fans, as well as industrial equipment. It has been designed to have high surge current performance with superior thermal properties and is meet the requirements of automotive applications. It is also important for audio amplifiers, surge suppressors and UPS systems.

As discussed previously, the 2KBP06M-M4/51 bridge rectifier converts AC power to DC power by using four diodes that are connected in a bridge circuit. The four diodes conduct in pairs, allowing current to flow through the four diodes in alternating half cycles of the input AC voltage, which produces a pulsating DC current at the output. The pulsating DC output is then smoothed by a filter capacitor.

The 2KBP06M-M4/51 bridge rectifier is a key component in a variety of electronic circuits. It is used to convert AC power to DC power, which is necessary for many electronic devices. Its surge current performance makes it suitable for use in industrial and automotive applications, and its superior thermal properties help it perform better and last longer than traditional devices.

The specific data is subject to PDF, and the above content is for reference