2KBP06ML-5303E4/51

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are semiconductor devices that are primarily used for controlling the current flow in a circuit. Bridge rectifiers are especially useful for controlling direct current (DC) because of their ability to convert alternating currents (AC) into DC. The 2KBP06ML-5303E4/51 is one such bridge rectifier that is designed to produce a high voltage, low noise, and high efficiency.

The 2KBP06ML-5303E4/51 is a six-diode bridge rectifier with an average forward voltage drop of 1.6V, which is slightly higher than the 1.5V that is typical for this type of diode. This diode is capable of handling up to 6A of current and is rated for a surge current of up to 10A. This bridge rectifier has a low impedance level, which reduces power dissipation and improves efficiency.

The 2KBP06ML-5303E4/51 is commonly used in many different applications that require a reliable direct current supply or voltage regulation. This diode is used in automotive, industrial, and consumer power adapters, as well as in power supplies, generators, and UPS systems.

As a bridge rectifier, the 2KBP06ML-5303E4/51 is designed to convert an AC voltage to DC by allowing current to flow in only one direction and then converting the AC signal to a DC signal. The bridge rectifier is made up of six diodes arranged in a bridge formation, with two diodes acting as a rectifying junction, and four diodes acting as a free-wheeling diode.

The rectifying junction of the 2KBP06ML-5303E4/51 is responsible for receiving the AC voltage and converting it to DC voltage. In this bridge rectifier, the rectifying junction consists of two diodes arranged in a parallel bridging configuration. As the AC voltage is applied, the two diodes act as a single diode and allow the current to flow in only one direction.

The free-wheeling diode of the 2KBP06ML-5303E4/51 is responsible for regulating the amount of current that flows in the circuit. The four diodes act as a single diode and provide a "shunt" to the current path, allowing excess current to be diverted to a separate path, thereby allowing the current to be regulated.

The 2KBP06ML-5303E4/51 is a high-efficiency bridge rectifier that is capable of converting AC to DC with minimal energy loss. This diode is easy to install and is a reliable, cost-effective solution for many power supply applications. It is suitable for use in a variety of applications such as automotive, consumer, industrial, and medical power supplies as well as power generators, UPS systems, and more.

The specific data is subject to PDF, and the above content is for reference