2N1613L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2N1613L is a single bipolar junction transistor (BJT) used for the amplification of signals from the perspective of input current, output current and voltage. The 2N1613L is widely used in various applications, such as audio and RF power equipment, interfaces and logic circuits, DC-DC and AC-DC converters, amplifiers, and input/output stages.

The 2N1613L is a surface mount NPN bipolar transistor composed of semiconductor material with three terminals. The construction of the 2N1613L transistor features a single base-emitter junction, controlled by the base contact and a single base-collector junction, controlled by the electrical field from the installed base as shown in the figure below.

The operation of the 2N1613L transistor is based on the phenomenon of charge carriers, which move within the crystal lattice, despite the presence of an electric field in three-dimensional space. The controlled current is modeled by the BJT as a function of input current and collector-emitter voltage.

The input current bias of the 2N1613L transistor is determined either by supplying a voltage to the Base-Emitter junction or by connecting it to a separate source of bias. If the applied voltage is close to or equal to the internal voltage, then the current gain of the 2N1613L is quite stable and increases with increasing temperature. The current gain of the 2N1613L is specified at a particular temperature and is referenced as the hFE value.

The 2N1613L can also be used as an amplifier, with the amplified output signal varying proportional to the input signal. An amplifier is a device that increases the strength of an incoming electrical signal. The 2N1613L applies the input signal to the base of the transistor, which then produces a stronger output signal on the collector. The input signal can be varied in amplitude, frequency and width to produce an amplified output signal.

DC-DC converters are also commonly used with 2N1613L transistors in order to convert a DC voltage level to another. It is also used in AC-DC converters to convert AC voltage levels to DC voltage levels. In addition, its uses include amplifiers, input/output stages, audio and RF power equipment, interfaces and logic circuits.

In conclusion, the 2N1613L is a single bipolar junction transistor designed to amplify signals, used in various applications such as audio and RF power equipment, logic circuits, DC-DC and AC-DC converters, and input/output stages. Its operation is based on the movement of charge carriers within a semiconductor crystal lattice when an electric field is applied. The current gain of the 2N163L is stable and increases with temperature.

The specific data is subject to PDF, and the above content is for reference