3006P-1-105Z

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers

Trimmer potentiometers or trimpots are adjustable resistors used to set or adjust an input signal to a desired output level. They are often used as part of a device\'s control system to adjust resistance, voltage, or current levels. The 3006P-1-105Z trimpot is one such device used in many electrical and electronic systems.

The 3006P-1-105Z trimpot is a miniature, three-terminal resistor with an adjustment screw and a potentiometer wiper. It is designed for applications such as small signal and RF attenuators, offset and bias trimming, and amplifier and filter volume control. It is also suitable for both through-hole and surface mount applications. The 3006P-1-105Z has a linear resistance adjustment from 1,000 ohms to 10,000 ohms, with a tolerance of ±20%.

The working principle of the 3006P-1-105Z trimpot is based on the basic concept of a variable resistor. When the adjustment screw is turned, the resistance between the wiper and the opposite contact is changed, thus altering the output voltage or current level. The 3006P-1-105Z trimpot is designed to provide a wide range of adjustment, from 1,000 to 10,000 ohms. By adjusting the resistor value, the trimpot can be used to set the output voltage or current to the desired value.

The 3006P-1-105Z trimpot has several applications in the field of electronics and electrical engineering. It can be used as an amplifier or filter volume control, a bias or offset trimming device, an attenuator, and a gain control. It is also suitable for various applications that require a wide range of adjustable resistance values, such as tuning filters, setting gain or offset voltages, or modifying frequency response. The 3006P-1-105Z trimpot is also suitable for many high frequency applications such as radio frequency amplifiers.

In conclusion, the 3006P-1-105Z trimpot is a versatile device that can be used for a broad range of applications. It is a miniature, three-terminal resistor with an adjustment screw and a potentiometer wiper. It has a linear resistance adjustment from 1,000 ohms to 10,000 ohms, with a tolerance of ±20%. It is suitable for both through-hole and surface mount applications, and can be used for amplifier or filter volume control, bias or offset trimming, attenuation, frequency response modification, and various high frequency applications.

The specific data is subject to PDF, and the above content is for reference