3006P-1-504LF

Series:	Trimpot® 3006 - Sealed
Packaging:	Tube
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Resistance:	500 kOhms
Power (Watts):	0.75W, 3/4W
Tolerance:	±10%
Temperature Coefficient:	±100ppm/°C
Number of Turns:	15
Adjustment Type:	Side Adjustment
Resistive Material:	Cermet
Mounting Type:	Through Hole
Termination Style:	PC Pins
Size / Dimension:	Rectangular - 0.250" x 0.190" Face x 0.750" L (6.35mm x 4.83mm x 19.05mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers - 3006P-1-504LF Application Field and Working Principle

Trimmer Potentiometers, also often denoted ‘trim pots’, are a type of variable resistors, whose values can be adjusted to suit various applications. They are among the most common and widely used electronic components in today’s world. The 3006P-1-504LF is a typical trimmer potentiometer and is used in a variety of applications.The 3006P-1-504LF trimmer potentiometer is constructed with three terminal pins and a circular dial. Its diameter is 5mm and it typically has an operating voltage of 50VDC/50VAC. This potentiometer uses a simple one-turn design, meaning the trimming action is done with one full turn of the potentiometer shaft instead of through multi-level turns. Additionally, the 3006P-1-504LF has a linear taper, meaning if the shaft is turned halfway, the resistance will be half of its maximum value.In terms of its application field, 3006P-1-504LF trimmer potentiometers are used in a variety of circuits, especially in electronics systems that need accurate resistive components to absorb or reject signals and current passages. Its applications can be observed in a variety of systems, such as motor speed control, voltage regulation, light dimmer circuits, and various other current-amplifying circuits. Furthermore, the trim pot has been utilized in a wide range of applications such as medical equipments, digital lamps, vehicles, television sets, power converters, and much more.Looking now at the work principle of the 3006P-1-504LF trimmer potentiometer, its three terminals create a linear voltage divider circuit, such that the voltage is divided both proportionally and inversely from one end of the resistor to the other. Here, the middle terminal is connected to a variable contact, where the adjustment point is located. This contact is connected to a shaft, which in turn is connected to a rotating linear element. So when the shaft is turned, it changes the contact\'s position to create different resistive paths in the resistor. As the voltage is divided, it causes the variable element to create a sort of tapering action, which is how voltage changes with respect to the resistor.In summary, the 3006P-1-504LF trimmer potentiometer is a type of variable resistor whose value can be adjusted as necessary to suit certain applications. It is composed of three terminal pins and has a diameter of 5mm and an operating voltage of 50VDC/50VAC. Its usage can be seen in various applications, such as motor speed control, voltage regulation, and light dimmer circuits. In terms of its working principle, the three terminal pins produce a linear voltage divider circuit that divides the voltage and creates a tapering action, which is how voltage changes with respect to the resistor.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description