3006W-1-100LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers, also known as trimming pots or trimpots, are adjustable resistors used for smaller value adjustments. The 3006W-1-100LF Trimmer Potentiometer is a 6mm single-turn unit rated to handle up to 100mW of power and a 100V maximum operating voltage. It is designed for high-precision tuning or calibration in a wide range of applications, and has a linear response.

The 3006W-1-100LF trimpot fits into a number of different applications. From analog signal processing to digital encoding, from aerospace devices to medical equipment, trimpots are used in almost every kind of device across numerous industries for a variety of purposes. Most commonly, the 3006W-1-100LF is used for microprocessor-controlled modules and analog circuits, such as a potentiometer-controlled circuit in audio equipment or balancing circuits for power management.

The working principle of the 3006W-1-100LF trimpot is relatively simple. It is a variable resistor, meaning that when the potentiometer shaft is turned, the resistance between the end plates or terminals changes. The resistance is a function of the angle of rotation, meaning that the resistance will increase or decrease depending on the direction that the shaft is turned. This change in resistance is used to adjust the output of the circuits in which the trimpot is used.

The 3006W-1-100LF trimpot is designed with a linear response, meaning that when the shaft is turned, the resistance between the end plates or terminals changes at a constant rate. This has the advantage of being able to accurately and precisely adjust the resistance in increments that can be easily related to the angle of the shaft. The advantage of this linear response is that it allows for easier tuning and calibration.

The 3006W-1-100LF trimpot is designed to handle up to 100mW of power and a maximum voltage of 100V. It is typically made from an insulated film substrate that protects it from environmental conditions, vibrations, or ESD. The unit also comes in an IP67 rated package, meaning that it is dust and waterproof when correctly sealed.

The 3006W-1-100LF trimpot is also relatively easy to integrate into a variety of different circuits, as it is typically soldered to a circuit board. This allows for greater flexibility in the design and implementation of circuits that require these trimpots. As the 3006W-1-100LF has a linear response, it is also relatively easy to use while tuning or calibrating different circuits.

In summary, the 3006W-1-100LF Trimmer Potentiometer is a 6mm single-turn unit rated to handle up to 100mW of power and a 100V maximum operating voltage. It is designed for high-precision tuning or calibration in a wide range of applications, and has a linear response. The unit is typically made from an insulated film substrate with an IP67 rating, and is relatively easy to integrate into different circuits. It is used in a variety of applications, from analog signal processing to digital encoding, and is an essential component of a wide range of devices.

The specific data is subject to PDF, and the above content is for reference