36DY223F150DJ2A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors use an aluminum oxide coating on their anode plate as well as an electrolyte that’s often composed of an ethylene glycol and boric acid mixture. This combination of components creates a highly reliable electrochemical system with enhanced capacitance stability, making them generally well-suited for a wide variety of applications. Specifically, the 36DY223F150DJ2A capacitor is used very frequently in industrial environments due to its proven reliability over years of use. Additionally, because of its small physical size and weight, the 36DY223F150DJ2A is often seen in consumer electronics and internal computers as well.

The 36DY223F150DJ2A uses an etched aluminum foil anode which is then covered in aluminum oxide. The anode is then combined with a paper separator and wound with tantalum wire, all of which is then soaked in an electrolytic solution. The majority of these capacitors also have an epoxy-coated aluminum case, although it can be specialty coated or made from plastic and other materials depending on the application need. The anode can also be hermetically sealed and potted, allowing the capacitor to remain highly reliable over long periods of time and in extreme environments.

In order for the aluminum electrolytic capacitor to work, two of the electrodes need to be connected to a potential. This voltage will cause a current to flow in the device and creates an electric field between the anode and the cathode. This electric field further causes an imbalance when it comes to positive and negative charges and causes ions to move through the electrolyte and towards the anode. As the electrons are accepted by the anode, a charge is built up on the anode plate and a corresponding opposite charge is created on the cathode plate. As the voltage continues to increase, the capacitance of the capacitor increases until there is no more room to hold a charge in the anode. A minimum voltage must be applied to keep the capacitor at full performance, and if it drops below that, the capacitor will quickly begin to lose its capacitance.

The 36DY223F150DJ2A capacitor is particularly useful in power supply filter circuits, where it is frequently used as a smoothing capacitor and motor starting capacitors. It is typically used for pulsating load smoothing as it has high ripple current performance and is also highly stable in electrical characteristics. It is also often found in audio equipment and converting back and forth between AC and DC. The 36DY223F150DJ2A is effective in a number of different applications due to the reliability and small size created by its construction and materials.

The 36DY223F150DJ2A aluminum electrolytic capacitor is a valuable component thanks to its reliability, durability, and broad applicability. It can be used for both AC and DC power supplies in industrial and consumer electronic products and is highly reliable under a variety of testing and environmental conditions. Thanks to its simplified construction and its ability to store energy, it is an indispensable item in electronics and other industrial settings.

The specific data is subject to PDF, and the above content is for reference